Abstract:Abstract In this study, the rheological behavior and dynamic viscosity of 10W40 engine oil in the presence of ternary-hybrid nanomaterials of cerium oxide (CeO 2 ), graphene oxide (GO), and silica aerogel (SA) were investigated experimentally. Nanofluid viscosity was measured over a volume fraction range of VF = 0.25–1.5%, a temperature range of T = 5–55 °C, and a shear rate range of SR = 40–1000 rpm. The preparation of ternary-hybrid nanofluids involved a two-step process, and the nanomaterials were dispersed in SAE 10W40 using a magnetic stirrer and ultrasonic device. In addition, CeO 2 , GO, and SA nanoadditives underwent X-ray diffraction-based structural analysis. The non-Newtonian (pseudoplastic) behavior of ternary-hybrid nanofluid at all temperatures and volume fractions is revealed by analyzing shear stress, dynamic viscosity, and power-law model coefficients. However, the nanofluids tend to Newtonian behavior at low temperatures. For instance, dynamic viscosity declines with increasing shear rate between 4.51% (at 5 °C) and 41.59% (at 55 °C) for the 1.5 vol% nanofluid. The experimental results demonstrated that the viscosity of ternary-hybrid nanofluid declines with increasing temperature and decreasing volume fraction. For instance, assuming a constant SR of 100 rpm and a temperature increase from 5 to 55 °C, the dynamic viscosity increases by at least 95.05% (base fluid) and no more than 95.82% (1.5 vol% nanofluid). Furthermore, by increasing the volume fraction from 0 to 1.5%, the dynamic viscosity increases by a minimum of 14.74% (at 5 °C) and a maximum of 35.94% (at 55 °C). Moreover, different methods (COMBI algorithm, GMDH-type ANN, and RSM) were used to develop models for the nanofluid's dynamic viscosity, and their accuracy and complexity were compared. The COMBI algorithm with R 2 = 0.9995 had the highest accuracy among the developed models. Additionally, RSM and COMBI were able to generate predictive models with the least complexity.

Investigating the thermal properties of single-grade engine oil (SAE 50) with the simultaneous addition of MWCNT and CuO nanoparticles

Study of Rheological Behavior, Economic Performance and Development of a Model for MWCNT-ZnO (30:70)/10W40 Hybrid Nanofluid Using Response Surface Methodology

Experimental Investigation and Model Development of the Non-Newtonian Behavior of CuO-MWCNT-10w40 Hybrid Nano-Lubricant for Lubrication Purposes

Viscosity Modification of Lubricating Oil Based on High-Concentration Silica Nanoparticle Colloidal System

Experimental investigation of effective parameters on MWCNT–TiO2/SAE50 hybrid nanofluid viscosity

The Effect of Multi-Wall Carbon Nanotubes/turbine Meter Oil Nanofluid Concentration on the Thermophysical Properties of Lubricants

Optimization of the Rheological Properties and Tribological Performance of SAE 5w-30 Base Oil with Added MWCNTs

Experimental, Price-Performance and Artificial Neural Network (ANN) Analysis of MWCNT-CuO/ Water-EG (50-50) Nanofluid as a Coolant/Antifreeze Working Fluid

Experimental investigation of dynamic viscosity of water-based nanofluids containing tungsten oxide–multi-walled carbon nanotubes–zirconium oxide nanoparticles at mono and hybrid conditions

Experimental Study on the Stability and Viscosity for the Blends of Functionalized MWCNTs with Refrigeration Compressor Oils

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Comparative Study on the Thermal Properties of Engine Oils and Their Nanofluids Incorporating Fullerene-C60, TiO2 and Fe2O3 at Different Temperatures

Rheological Characteristics, Pressure Drop, and Skin Friction Coefficient of MWCNT–Oil Nanofluid Flow Inside an Inclined Microfin Tube

Molecular dynamics simulations and experimental investigation of viscosity of CuO-oil nanolubricant at different temperatures and volume fractions of nanoparticles

Examining rheological behavior of CeO2-GO-SA/10W40 ternary hybrid nanofluid based on experiments and COMBI/ANN/RSM modeling

Experimental investigation of rheological behavior of the hybrid nanofluid of MWCNT–alumina/water (80%)–ethylene-glycol (20%)

Investigating the viscosity of hybrid nano-lubricant containing MWCNTs with ANN modeling to introduce the best and most optimal lubricant

A new model for viscosity prediction for silica-alumina-MWCNT/Water hybrid nanofluid using nonlinear curve fitting

Applying knowledge management in optimal modeling of viscosity of nanofluids by response surface methodology for use in automobiles engine

Dynamic Viscosity Prediction for MWCNT-MgO (10%-90%) -SAE40 Oil Hybrid Nano-lubricant Using Artificial Neural Network and Multi-Dimensional Nonlinear Least Square Curve Fitting

Comparing the modeling functions of hybrid nano-lubricant containing CuO and MWCNTs with standard quality measurement criteria to introduce the most optimal correlation function