Abstract:The main objective of this study is to investigate three distinct non-commonly used metal oxide-based nanoparticles, i.e., CuO + MWCNT, MgO + MWCNT, and SnO2 + MWCNT with a weight mixture ratio of 80:20 each (by weight ratio) and DI water as a base fluid along with the addition of the CTAB surfactant at 3:2. The study incorporates the effect of varying size, dp (20–50 nm), different temperature range (25–50 °C), and volume concentration range of 0.25–1.5%. After examining the stability of prepared HNF over the 30th day from the preparation day and some of the meticulous experimentation on isobaric heat capacity, a new correlation is developed to predict the specific heat of hybrid nanofluid. Considering various parameters like various volume concentration (φ = 0.25–1.50%) and temperature range (T = 25–50 ℃), specific heat of nanofluid, specific heat of base fluid, density of nanofluid, density of base fluid, and average diameter of used nanoparticles. The developed correlation was with 2.93% and 0.903% maximum and average absolute deviation, respectively. Experimental results show the maximum decrement in specific heat value is about 15.09% compared to base fluid DI water at 25 ℃ and 1.50% volume concentration with an average particle diameter of 20 nm for the MgO + MWCNT (80:20)/water HNF. However, it is found that the rate of decrement decreases with the increase of dp from 20 to 50 nm. From the current experimental results, it is concluded that the usage of HNF on relatively higher temperature significantly influences the overall thermophysical properties such as enhancement in thermal conductivity and decrement in viscosity of the working fluid, by paying the marginal loss in specific heat capacity. Therefore, it recommended that the usage of HNF on higher temperature is more beneficial for critical heat transfer application such as HVAC, effective thermal management of the system, natural and forced convection phenomenon.

Experimental study and modeling of thermal and rheological characteristics of water-based CuO/CaCO 3 /SiO 2 ternary hybrid nanofluid

Comprehensive study of stability and thermo-physical properties of water-based CaCO3/SiO2 dual hybrid nanofluid

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

An experimental study on characterization, stability and dynamic viscosity of CuO-TiO2/water hybrid nanofluid

Studies on Evaluation of the Thermal Conductivity of Alumina Titania Hybrid Suspension Nanofluids for Enhanced Heat Transfer Applications

A comprehensive laboratory measurement on the thermal characteristics of Ag–CuO–tungsten oxide/water nanofluid in mono, hybrid and ternary cases and presenting a new correlation

Synthesis of new dihybrid nanofluid of TiO2/MWCNT in water–ethylene glycol to improve mixture thermal performance: preparation, characterization, and a novel correlation via ANN based on orthogonal distance regression algorithm

Experimental investigation of dynamic viscosity of water-based nanofluids containing tungsten oxide–multi-walled carbon nanotubes–zirconium oxide nanoparticles at mono and hybrid conditions

Experimental Performance Evaluation and Artificial-Neural-Network Modeling of ZnO-CuO/EG-W Hybrid Nanofluids

Experimental study on the thermal properties of Al2O3‐CuO/water hybrid nanofluids: Development of an artificial intelligence model

Thermal Conductivity of Al2O3 and CeO2 Nanoparticles and Their Hybrid Based Water Nanofluids: An Experimental Study

Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach

Study on thermal conductivity of water-based nanofluids with hybrid suspensions of CNTs/Al2O3 nanoparticles

Experimental Investigation on Stability, Viscosity, and Electrical Conductivity of Water-Based Hybrid Nanofluid of MWCNT-Fe2O3

Experimental measurement of viscosity and electrical conductivity of water-based γ-Al2O3/MWCNT hybrid nanofluids with various particle mass ratios

Numerical simulations of thermal heat conservation in hybrid nanofluids with chemical reaction, viscous dissipation, and inclination

Experimental, Price-Performance and Artificial Neural Network (ANN) Analysis of MWCNT-CuO/ Water-EG (50-50) Nanofluid as a Coolant/Antifreeze Working Fluid

Thermal conductivity prediction of WO 3 -CuO-Ag (35:40:25)/water hybrid ternary nanofluid with Artificial Neural Network and back-propagation algorithm

Experimental comparison of specific heat capacity of three different metal oxides with MWCNT/ water-based hybrid nanofluids: proposing a new correlation

Experimental investigation of rheological behavior of the hybrid nanofluid of MWCNT–alumina/water (80%)–ethylene-glycol (20%)

Artificial neural network modeling of thermal characteristics of WO 3 -CuO (50:50)/water hybrid nanofluid with a back-propagation algorithm