Abstract:The present work considers a shell-and-coil heat exchanger, and the hybrid nanofluid's flow and heat transfer inside the proposed thermal system are numerically evaluated. The coil tube has a conical pattern and is oriented horizontally inside the shell. Three water-based hybrid nanofluids are considered here as heat transfer fluids. A commercial CFD code that uses the finite volume method performs the numerical analysis. The regime of fluid flow is turbulent in both coil and shell sections. The validation analysis of the present numerical model was performed using the experimental results of the reference, and accordingly, the accuracy of the present numerical model was proved. This work includes two sectors. In the first part, the volume concentration of the considered hybrid nanofluid was kept constant, and the influence of the hybrid nanofluid kind on the hydrothermal behaviour of the shell-conical-coil heat exchanger was evaluated numerically. In this section, three hybrid nanofluids, (i) Water/MgO–TiO 2 , (ii) Water/MOS 2 -CuO, and (iii) Water/Ag-HEG, were employed. Also, for all suggested hybrid nanofluids, the volume concentration of both employed nanoparticles are equal to each other, φ 1 = φ 2 . The obtained outcomes depicted that between various considered heat transfer fluids, the Water/MgO–TiO 2 model displayed the most outstanding thermal performance value in all the investigated Dean numbers, and the model Water/MOS 2 -CuO was in second place. Moreover, the maximum thermal performance for the hybrid nanofluid was obtained at φ 1 = φ 2 = 0.7. The Ag-HEG/Water and MgO–TiO 2 /Water hybrid nanofluids have the lowest and maximum thermal performance at the lowest considered Dean number among the evaluated hybrid nanofluids. As a result, the MgO–TiO 2 /Water hybrid nanofluid has roughly 18.95 % higher thermal performance than the Ag-HEG/Water hybrid nanofluid. Furthermore, the MgO–TiO 2 /Water and Ag-HEG/Water hybrid nanofluids have the highest and lowest thermal performance at the highest considered Dean number, respectively. Consequently, the MgO–TiO 2 /Water hybrid nanofluid exhibits approximately 39.22 % higher thermal performance than the Ag-HEG/Water hybrid nanofluid. The MgO–TiO 2 /Water hybrid nanofluid has the highest and lowest thermal performance at the lowest Dean number, with φ 1 = φ 2 = 0.7 and φ 1 = φ 2 = 0.3, respectively. The φ 1 = φ 2 = 0.7 model has a thermal performance that is approximately 39.28 % greater than the φ 1 = φ 2 = 0.3 model at the lowest regarded Dean number. At the highest regarded Dean number, the MgO–TiO 2 /Water hybrid nanofluid with φ 1 = φ 2 = 0.3 exhibits a lower thermal performance than the model φ 1 = φ 2 = 0.7 by about 14.28 %.

Performance characterization of a solar-powered shell and tube heat exchanger utilizing MWCNTs/water-based nanofluids: An experimental, numerical, and artificial intelligence approach

Thermal performance enhancement of shell and helical coil heat exchanger using MWCNTs/water nanofluid

Experimental investigation of the performance of the plate heat exchanger using (Multi-Walled Carbon Nanotubes–Al2O3/water) hybrid nanofluid

Convective Heat Transfer and Pumping Power Analysis of MWCNT + Fe3O4/Water Hybrid Nanofluid in a Helical Coiled Heat Exchanger with Orthogonal Rib Turbulators

Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes

A novel application for energy efficiency improvement using nanofluid in shell and tube heat exchanger equipped with helical baffles

Experimental Investigation of the Effect of Graphene/Water Nanofluid on the Heat Transfer of a Shell-and-Tube Heat Exchanger

Thermo-hydraulic performance investigation of triple-tube heat exchanger with MXene-based various shape hybrid nanofluids

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Shell and tube heat exchanger thermal-hydraulic analysis equipped with baffles and corrugated tubes filled with non-Newtonian two-phase nanofluid

Hydrothermal behaviour of hybrid nanofluid flow in a shell-and conical coil tube heat exchanger; numerical approach

Numerical investigation on assessing the influence of diverse-shaped hybrid nanofluids on thermal performance of triple tube heat exchanger

Enhancing heat transfer efficiency in shell-and-tube heat exchangers with SiC and CNT-infused alkaline water nanofluids

Performance Prediction and Optimization of Nanofluid-Based PV/T Using Numerical Simulation and Response Surface Methodology

Performance evaluation of shot-blasted heat exchangers with MWCNT and activated carbon nanofluids: assessing entropy, exergy, sustainability index, Grashof, Rayleigh, and Richardson numbers for solar thermal applications

Experiment on Heat Exchanger Using Innovative Coils and Phase Change Material/MXene Nanofluids

Experimental investigation on the performance of hybrid Fe3O4 coated MWCNT/Water nanofluid as a coolant of a Plate heat exchanger

Numerical investigation of the simultaneous effect of twisted tape and nanofluid hybrid in shell and spiral tube heat exchanger with a special design

Influence of Water Based Binary Composite Nanofluids on Thermal Performance of Solar Thermal Technologies: Sustainability Assessments

Comparative analysis of thermo-hydraulic performance in absorber tubes with small box inserts: impact of nanofluid integration

Use of segmental baffle in shell and tube heat exchanger for nano emulsions