Abstract:The utilization of hybrid nanofluids is a promising technique in the high temperature solar applications specially, parabolic trough collector (PTC). The purpose of the current research is to analyze, evaluate and compare the performance of PTC (converging-diverging absorber tube) using mono and hybrid nanofluids to increase the convective heat transfer coefficient. To obtain this objective, converging-diverging tube with sine geometry is examined as it enhances the turbulence in the flow due to increase in the inner surface roughness. The performance of the absorber tube is assessed for hybrid nanofluid (1.5% MWCNTs/therminol-VPI and 1.5% TiO2/therminol-VPI) as well as mono nanofluids (3% MWCNTs and 3% TiO2)/therminol-VPI at a wide range of inlet temperature ranges from 350 K to 600 K. In order to compare the results of the converging-diverging tube, a smooth absorber tube is also investigated at the same design conditions. Furthermore, our study comprises of the overall performance investigation about the exergy analysis, pressure drop, pumping power required and performance evaluation criteria to investigate the comprehensive performance of the absorber tubes. The results of the study reveal that the use of modified geometry with hybrid nanofluids considerably improves the performance of the system due to the presence of swirls and turbulence that will reduce absorber surface temperature and ultimately the heat losses. More specifically, the thermal efficiency enhancement for the converging-diverging absorber tube with hybrid nanofluids ranges from 3.61% to 5.27%, while it is varied from 1.70% to 1.91% for smooth tube using hybrid nanofluids. Reynolds number ranges from 12 000 to 90 300 for hybrid nanofluid, while it is from 14 000 to 97 600 for pure therminol-VPI. Furthermore, mean enhancement in the heat transfer coefficient using converging-diverging tube with hybrid, TiO2 and MWCNTs therminol-VPI-based nanofluids are 1.72%, 0.67% and 0.70%, respectively at a mass flow rate of 0.6 kg/s and an ambient temperature of 300 K. The converging-diverging/hybrid case has the values of 1.47 and 1.33 for performance evaluation criteria I and II, while all other cases has significantly less values compared to hybrid nanofluids. The thermal efficiency enhancement has a pressure-drop penalty that leads to higher pumping power requirement; however, this requirement is very small as compared to the useful energy gain.

Comparative analysis of thermo-hydraulic performance in absorber tubes with small box inserts: impact of nanofluid integration

Comparative performance assessment of different absorber tube geometries for parabolic trough solar collector using nanofluid

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Thermal and Thermodynamic Comparison of Smooth and Convergent‐divergent Parabolic Trough Absorber Tubes with the Application of Mono and Hybrid Nanofluids

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

Improving sensible heat storage in a vertical annular pipe subject to variable inlet boundary condition using TiO2/water nanofluid: Numerical study

Comparisons of Numerical and Experimental Investigations of the Thermal Performance of Al2O3 and TiO2 Nanofluids in a Compact Plate Heat Exchanger

Numerical evaluation of the heat transfer in a shell and corrugated coil tube heat exchanger with three various water‐based nanofluids

Numerical investigation on the thermal performance of parabolic trough solar collector with synthetic oil/Cu nanofluids

Enhancing Thermal–Hydraulic Performance in Nuclear Reactor Subchannels with Al2O3 Nanofluids: A CFD Analysis

Thermal performance simulation of parabolic trough collector with ternary nanofluid flows and half-star-shaped fins inserts in different receivers

Numerical study of the thermal performance of a single-channel cooling PV system using baffles and different nanofluids

A numerical study of water based nanofluids in shell and tube heat exchanger

Numerical Study of Thermal-Hydraulic Performance Improvement of Enhanced Surface Tubes

Thermal and hydraulic characteristics of a single reverse nanofluid jet in a double-wall cooling configuration

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Analysis of thermal efficiency of a corrugated double-tube heat exchanger with nanofluids

Thermo-hydraulic performance of metal oxide nanofluid flow through the helical coil tube of a three-fluid heat exchanger: an experimental and optimization study

Performance characterization of a solar-powered shell and tube heat exchanger utilizing MWCNTs/water-based nanofluids: An experimental, numerical, and artificial intelligence approach

Experimental study on cooling performance of nanofluid flow in a horizontal circular tube