Abstract:The superconducting magnet group at IHEP (the Institute of High Energy Physics, Chinese Academy of Sciences, China) has been engaging in the R&D of high field accelerator magnets since 2014 for the pre-study of the next-generation high energy particle accelerators like CEPC-SPPC (Circular Electron Positron Collider-Super Proton Proton Collider), FCC (Future Circular Collider), etc. A superconducting model dipole magnet named LPF1 was first fabricated with NbTi and Nb3Sn in a combined common-coil configuration in 2017 and tested in 2018, a main field of 10.23 T was reached within two 10 mm apertures. The magnet was reassembled with higher pre-stress in 2019 to investigate the influence of the pre-stress loading level on the performance of common-coil dipole magnets. The main field of this upgraded magnet named LPF1-S was increased to 10.71 T within two 12 mm apertures. By improving the key processing technologies in Rutherford cable fabrication, coil winding, Nb3Sn & NbTi splices soldering and coil impregnation, the recently fabricated model dipole magnet named LPF1-U attained a 12.47 T main field in two 14 mm apertures in 2021. To fully take advantage of Nb3Sn and NbTi superconductors in different field regions, LPF1-U was still designed and developed with a combined coil configuration with Nb3Sn for the inner two coils and NbTi for the outer four coils. Additionally, graded coil topology and different coil LSS (length of straight section) settings were adopted in the optimization of LPF1-U layouts. Bladder and key technology was used for the support structure, and fiber optic sensors based on FBG (fiber Bragg grating) were utilized to monitor the stress distribution and variation in the structures and coils through the whole process from magnet assembly to cool-down and excitation. During the performance test, a relatively large number of trainings were carried out and LPF1-U became more stable after the thermal cycle. A peak field of 12.7 T in the coils (12.47 T main field in apertures) corresponds to an operating current of 6865 A and a load line ratio of 90% was finally attained. It is worth mentioning that LPF1-U is the first hybrid-Nb3Sn, NbTi-common coil dipole magnet that has achieved a main field of more than 12 T in two apertures. The design, fabrication and performance analysis of the LPF series dipole magnets are presented in this paper.

Detailed design of the large-bore 8 T superconducting magnet for the NAFASSY test facility

Status of the High Field Cable Test Facility at Fermilab

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

Cryogenic and safety design of the future high field cable test facility at Fermilab

Status of the Top Plate and Anticryostat for High Field Cable Test Facility at Fermilab

Design and Performance of a Linear Flux Pump for the Frascati Coil Cold Test Facility

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Conceptual Design Study of a Large Bore Superconducting Test Facility Magnet, SUCCEX

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

Conceptual Design Study of a Test Facility Magnet for Fusion Conductor Samples

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Mechanical Design, Assembly and Strain Measurement Results of a 13-T Superconducting Dipole Magnet

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

Development of YBCO Insert for a 25 T All Superconducting Magnet

Analysis of the mechanical performance of the 4.2 m long MQXFA magnets for the Hi-Lumi LHC Upgrade

Development of Superconducting Model Dipole Magnets Beyond 12 T with a Combined Common-Coil Configuration

Bending Tolerance of React&Wind Nb 3 Sn Conductors for Fusion Magnets

Development of a Superconducting Magnet for High Magnetic Force Application

MQXFA Final Design Report

Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator under High Magnetic Field