Abstract:Four solid wastes including sludge, watermelon rind, corncob, and eucalyptus and their demineralized samples were selected to conduct pyrolysis experiments under different experimental conditions, including temperature, residence time, carrier gas flow rate, and heating rate, respectively. The co‐pyrolysis experiment was carried out after mixing different types and different ratios of solid wastes to investigate the influence of different factors on yield of char, tar, and gas. A three‐layer artificial neural network (ANN) based on back propagation (BP) algorithm was developed and trained to simulate and predict the yield of products. The experimental conditions and characteristic parameters of samples, including the content of C, H, K, Ca, Mg, Fe, volatile, ash, and fixed carbon, were selected as input parameters while the yields of char, tar, and gas were selected as output parameters. The effect of input parameters including residence time, carrier gas flow rate, heating rate, and the content of metal elements on the network performance was investigated in detail to optimize the ANN model. It was found that the metal element has the greatest influence, and its importance to the yield of each product exceeds 25%. The pyrolysis experimental data of single‐component solid waste were selected as the model training set for model learning and training and then use the trained model to predict the co‐pyrolysis experimental data of multi‐component solid waste. Good agreement was achieved between experimental and predicted results; the correlation coefficient was 0.9836, and the root mean square error (RMSE) was only 2.4273, which revealed that the ANN method can be effectively used in predicting of the gas‐liquid‐solid product distribution after solid waste pyrolysis process.Novelty StatementIn this manuscript, based on the principle of artificial neural network, experimental conditions and sample characteristic parameters are used as input variables to model the distribution of different sample pyrolysis products. The model is used to predict the co‐pyrolysis data, and the influences of input parameters on the accuracy of the model are analyzed. The model values are in good agreement with the experimental data, indicating that the model is a high accurate general model and can be applied to different samples.

Artificial Neural Network (ANN) Analysis of Co-pyrolysis of Waste Coconut Husk and Laminated Plastic Packaging

Investigation and prediction of co-pyrolysis between oily sludge and high-density polyethylene via in-situ DRIFTS, TGA, and artificial neural network

Co-pyrolysis of oil-based drill cuttings and pinewood sawdust: Thermal behavior, synergistic effect, artificial neural network and empirical reaction model

Activated biochar production from young coconut waste (Cocos nucifera) as bioadsorbent: a pathway through Artificial Neural Network (ANN) optimization

Predicting bio-oil yield obtained from lignocellulosic biomass pyrolysis using artificial neural networks

Characterization of biodiesel based on plastic pyrolysis oil (PPO) and coconut oil: Performance and emission analysis using RSM-ANN approach

Optimization of diesel engine performance and emission using waste plastic pyrolytic oil by ANN and its thermo-economic assessment

Pyrolysis of Low Density Polyethylene: Kinetic Study Using TGA Data and ANN Prediction

Kinetic and Artificial neural network modelling of marabú (Dichrostachys cinerea) pyrolysis based on thermogravimetric data

Thermodynamics, kinetics, gas emissions and artificial neural network modeling of co-pyrolysis of sewage sludge and peanut shell

Co–pyrolysis of De–alkalized Lignin and Coconut Shell Via TG/DTG–FTIR and Machine Learning Methods: Pyrolysis Characteristics, Gas Products, and Thermo–kinetics

Optimization of Operational Parameters Using Artificial Neural Network and Support Vector Machine for Bio-oil Extracted from Rice Husk

Integrating Taguchi method and artificial neural network for predicting and maximizing biofuel production via torrefaction and pyrolysis

The Modeling and Products Prediction for Biomass Oxidative Pyrolysis Based on PSO-ANN Method: an Artificial Intelligence Algorithm Approach

Prediction of gas‐liquid‐solid product distribution after solid waste pyrolysis process based on artificial neural network model

Investigating the Impact of Microwave and Conventional Heating Sources on the Co-pyrolysis of Plastics with Non-Biomass Materials

Co-pyrolysis of pinewood and HDPE: pyrolysis characteristics and kinetic behaviors study

Artificial Neural Network based prediction of Specific Fuel Consumption in various Compression Ratio CI Engine Fueled with Various Plastic Composition Pyrolysis oil and Diesel

A Three-Phase Analysis of Synergistic Effects During Co-pyrolysis of Algae and Wood for Biochar Yield Using Machine Learning

Artificial neural networks for the prediction of biochar yield: A comparative study of metaheuristic algorithms

Comparison of Artificial Neural Networks and kinetic inverse modeling to predict biomass pyrolysis behavior