Abstract:Lattice structures are bio-inspired designs made up of repeated unit cells consisting of beams, surfaces, or plates that fit together in an ordered or stochastic fashion. These unit cells are configured according to their size and shape in three dimensions. Simple lattices can be created using standard manufacturing techniques such as computer numerical control machining, welding, and casting. Additive manufacturing enables customers to make complex structures with small features at a reasonable cost. In the present work, using octagon, hexagrid, and rhombic dodecahedron lattice topologies, characterized by unit cell size from 3 × 3 × 3 to 7 × 7 × 7 mm and strut thickness from 0.5 to 1.5 mm, the structural behavior of a solid cylindrical model made of polylactic acid material under compression is analyzed. Finite element analysis (FEA) through Autodesk® Netfabb® solvers was used to assess lattice structure mechanical and structural properties. The results were validated by physical compression testing on additively manufactured samples. Cellular designs with 3 × 3 × 3 mm unit cells and 1.5 mm strut thickness displayed the lowest Von Mises stress and deformation. For different topologies, lowest results were rhombic dodecahedron (stress through FEA as 61.3108 MPa and stress through physical test as 61.05 MPa, deformation through FEA as 0.49921 mm and deformation through physical test as 0.48 mm), octagon (stress through FEA as 77.4147 MPa and stress through physical test as 76.92 MPa, deformation through FEA as 0.53316 mm and deformation through physical test as 0.51 mm), and for hexagrid (stress through FEA as 62.2911 MPa, stress through physical test as 62.15 MPa, deformation through FEA as 0.81997 mm and deformation through physical test as 0.81 mm). The percentage error between the stress through FEA and stress through physical test for octagon, hexagrid, and rhombic dodecahedron lattice topology was found out to be 0.63, 0.22, and 0.43%, respectively. Corresponding percentage deformation error between deformation through FEA and deformation through physical test was also found out to be 4.343, 2.435, and 3.848%, respectively. In addition, the impacts of volume reduction, surface area of the lattice, and relative density were explored pertaining to the structural behavior of the lattice. As a result of the examination into mechanical qualities based on these criteria, rhombic dodecahedron lattice topology with 3 × 3 × 3 mm unit cell size and strut thickness of 1.5 mm was found to be a better choice than octagon and hexagrid lattice topologies for 3D printing components that were loaded under axially compressive loads.

Mechanical properties of additive manufactured variable-density Kelvin lattice structures: a novel design method for Kelvin unit cells

Design Optimization of Lattice Structures under Compression: Study of Unit Cell Types and Cell Arrangements

Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing

Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V

Multiaxial mechanical characterization of additively manufactured open-cell Kelvin foams

Effective Mechanical Properties of Additive Manufactured Strut‐Lattice Structures: Experimental and Finite Element Study

Structure, Process, and Material Influences for 3D Printed Lattices Designed With Mixed Unit Cells

Heterogeneous compressive responses of additively manufactured Ti-6Al-4V lattice structures by varying geometric parameters of cells

Mechanical Properties Evaluation Based on the Variable Gradient of Body-Centered-Cubic-Based Lattice Structure Prepared by Laser Powder Bed Fusion

Compressive performance and energy absorption of additively manufactured metallic hybrid lattice structures

Additive Manufacturing of Anisotropic TC4 Cubic Hollow‐Strut Lattice Structures with High Specific Yield Strength: Optimization, Properties, and Failure Modes

Architecture Design of Periodic Truss-Lattice Cells for Additive Manufacturing

Research on Parametric Design and Mechanical Performance of Variable Cross-Section Diamond Lattice Structures

Mechanical properties of the composite lattice structure with variable density and multi-configuration

Mechanical characterization and constitutive modeling of additively-manufactured polymeric materials and lattice structures

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

Compression Behavior of 316L Lattice Structures Produced by Indirect Additive Manufacturing

Influence of Bracing on the Mechanical Properties of Ti6Al4V Lattice Structures

Rate-dependent behaviour of additively manufactured topology optimised lattice structures

A novel design strategy to enhance buckling resistance of thin-walled single-cell lattice structures via topology optimisation

Build parameter influence on strut thickness and mechanical performance in additively manufactured titanium lattice structures