Abstract:Heat-resistant, load-bearing components are common in aircraft, and they have high requirements for lightweight and mechanical performance. Lattice topology optimization can achieve high mechanical properties and obtain lightweight designs. Appropriate lattice selection is crucial when employing the lattice topology optimization method. The mechanical properties of a structure can be optimized by choosing lattice structures suitable for the specific stress environment being endured by the structural components. Metal lattice structures exhibit excellent unidirectional load-bearing performance and the triply periodic minimal surface (TPMS) porous structure can satisfy multi-scale free designs. Both lattice types can provide unique advantages; therefore, we designed three types of metal lattices (body-centered cubic (BCC), BCC with Z-struts (BCCZ), and honeycomb) and three types of TPMS lattices (gyroid, primitive, and I-Wrapped Package (I-WP)) combined with the solid shell. Each was designed with high level of relative density (40%, 50%, 60%, 70%, and 80%), which can be directly used in engineering practice. All test specimens were manufactured by selective laser melting (SLM) technology using Inconel 718 superalloy as the material and underwent static tensile testing. We found that the honeycomb test specimen exhibits the best strength, toughness, and stiffness properties among all structures evaluated, which is especially suitable for the lattice topology optimization design of heat-resistant, unidirectional load-bearing structures within aircraft. Furthermore, we also found an interesting phenomenon that the toughness of the primitive and honeycomb porous test specimens exhibited sudden increases from 70% to 80% and from 50% to 60% relative density, respectively, due to their structural characteristics. According to the range of the exponent value n and the deformation laws of porous structures, we also concluded that a porous structure would exhibit a stretching-dominated deformation behavior when exponent value n 0.55, and a stretching-bending-dominated deformation behavior when 0.3 < n < 0.55. This study can provide a design basis for selecting an appropriate lattice in lattice topology optimization design.

Research on Parametric Design and Mechanical Performance of Variable Cross-Section Diamond Lattice Structures

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Investigation on Mechanical Properties’ Anisotropy of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

Design and Mechanical Experiment of Functionally-Graded Lattice Structure with Multiple Loading Conditions

Mechanical Properties Evaluation Based on the Variable Gradient of Body-Centered-Cubic-Based Lattice Structure Prepared by Laser Powder Bed Fusion

Evaluating Lattice Mechanical Properties for Lightweight Heat-Resistant Load-Bearing Structure Design

Mechanical Performance of a Node-Reinforced Body-Centered Cubic Lattice Structure: An Equal-Strength Concept Design

Generative design and mechanical properties of the lattice structures for tensile and compressive loading conditions fabricated by selective laser melting

Build parameter influence on strut thickness and mechanical performance in additively manufactured titanium lattice structures

Investigation on Morphology and Mechanical Properties of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

Mechanical Properties of an Improved 3D-Printed Rhombic Dodecahedron Stainless Steel Lattice Structure of Variable Cross Section

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Design Optimization of Lattice Structures under Compression: Study of Unit Cell Types and Cell Arrangements

Crashworthiness and stiffness improvement of a variable cross-section hollow BCC lattice reinforced with metal strips

Effect of heat treatment on compression properties of the 316L diamond structure fabricated through selective laser melting

Design and mechanical performances of a novel functionally graded sheet-based lattice structure

TPMS-based interpenetrating lattice structures: Design, mechanical properties and multiscale optimization

Adjustable mechanical performances of 4D-printed shape memory lattice structures

Topological and Mechanical Properties of Different Lattice Structures Based on Additive Manufacturing

Lattice Structures—Mechanical Description with Respect to Additive Manufacturing

Tailoring 3D Star-Shaped Auxetic Structures for Enhanced Mechanical Performance