Abstract:A major part of energy consumption is reported from the residential and commercial buildings due to the large usage of mechanical devices to maintain a comfortable indoor ambiance. Thermal conductivity of the materials used in these buildings can be reduced by using low density materials and an efficient thermal energy storage strategy. In the present paper, the thermal performance of a building envelope was improved by incorporating phase change material (PCM) into the foam concrete mix. At first, PCM was developed by using a light weight material, expanded vermiculite (EV) impregnated with capric acid (CA) and ethyl alcohol (EA) under vacuum conditions. Different foam composite mixes were prepared and experimentally tested. Foam concrete mixtures with EV, CA-EA/EV based PCM, and PCM with added nano silica and coir fiber combinations (PSC) were prepared by the replacement of fine aggregate (M−sand) in various weight percentages. This study reveals that PCM with a CA to EV proportion of 55% (wt.) had the maximum adsorption and stability, as assessed through liquid leakage. In addition to improving thermal efficiency, PCM enhanced foam concrete composites showed improved mechanical, hydration, durability, and thermal characteristics. In comparison to the control foam concrete and PCM foam concrete mixes, the addition of nano silica and coir fiber added foam concrete mixtures (PSC) demonstrated improved strength and shrinkage qualities. These improved properties are attributed to the pozzolanic activity of nano silica and the bridging effects resulting from the fiber to micro cracks. Apart from the durability and strength characteristics, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and thermogravimetry analysis (TGA) were adopted to characterize the morphological, chemical, and thermal aspects of the different foamed concrete mixtures. The DSC results proved that the PSC-5% foam concrete mixture had latent heat capacities of 43.90 J/g for cooling and 69.16 J/g for heating, with melting and solidification temperatures of 31.51 °C and of 21.77 °C, respectively. TGA also revealed that the proposed PCM composite has a high thermal resistance. The PSC-5% shows better compatibility as per SEM and EDS tests by the proper penetration of the nano silica in the foamed composites through the pores. Finally, the thermal analysis tests demonstrated that the PSC-5% has a thermal conductivity of 0.129 W/m-K, which is 49.60% lesser than the foam concrete control sample, and also possesses an improved heat storage capacity, which ensures better thermal comfort in buildings.

Experimental investigation of rigid polyurethane foam/microencapsulated phase change material composite for thermal energy storage in electronic component

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Development of smart polyurethane foam with combined capabilities of thermal insulation and thermal energy storage by integrating microencapsulated phase change material

Preparation and Thermal Properties of Microencapsulated Paraffin with Polyurea/acrylic Resin Hybrid Shells As Phase Change Energy Storage Materials

Optimized emulsifier combination based microencapsulated phase change materials (MicroPCMs): Preparation, characterization, and applications

Microencapsulated phase change n-Octadecane with high heat storage for application in building energy conservation

Fabrication and Performance of Composite Microencapsulated Phase Change Materials with Palmitic Acid Ethyl Ester as Core

Polyurethane/n-octadecane@silicon dioxide-polyhydroxyethyl methacrylate form-stable phase change materials with enhanced mechanical properties and thermal energy storage

Preparation and thermal properties of palmitic acid/copper foam phase change materials

Preparation and characterization of polyurethane foams containing microencapsulated phase change materials for thermal energy storage and thermal regulation

Microencapsulation of Phase Change Materials with a Soy Oil-Based Polyurethane Shell via Pickering Emulsion Polymerization

Excellent interfacial compatibility of phase change capsules/polyurethane foam with enhanced mechanical and thermal insulation properties for thermal energy storage

Preparation and characterization of oligomeric thermal phase change polyurethane foam

Study on foam concrete incorporated with expanded vermiculite/capric acid PCM – A novel thermal storage high-performance building material

Investigation of Phase Change Material Integrated With High Thermal Conductive Carbon Foam Inside Heat Sinks for Thermal Management of Electronic Components

Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage

Synthesis of phase change microcapsules with binary fatty acid ester core and their feasibility investigation in energy conservation of cementitious materials

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Fabrication and performance of phase change microcapsules with fatty acid monoglyceride based waterborne polyurethane as the shell

Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation