Abstract:Shape-stabilized phase change materials (SSPCM) offer significant potential in industrial applications, effectively addressing corrosion and thermal stress issues associated with phase change material (PCM) at high temperatures. To advance the large-scale development of SSPCMs, this study innovatively proposes the wet-state extrusion and sintering method to prepare SSPCM particles (SSPCM-P) and characterize them. Solar salt is the PCM, while calcined dolomite is the skeletal support material (SSM). Results indicate successful fabrication of SSPCM-P with salt content below 60 wt% post-sintering, a lower threshold than those achieved via cold-pressing and hot-sintering methods. This is because, during wet mixing and evaporation, salts migrate to the surface of the sample and mixtures with high salt content on the surface tend to bond together during sintering. SEM observations reveal a transparent interface between SSM and PCM pre-sintering, whereas post-sintering, PCM uniformly adheres to the SSM surface, with smaller particle sizes demonstrating enhanced densification. SSPCM-P shows commendable chemical stability, with the enthalpy of melting/solidification for SSPCM-P with 60 % salt content slightly below the theoretical value at 63.6/63.3 J/g. Charging and discharging experiments highlight significantly improved thermal properties of SSPCM-P compared to sensible heat materials, enabling oil heating to higher temperatures. SSPCM-P can maintain stability during recirculation. Furthermore, it is noted that SSPCM-P is unsuitable for vapour applications due to salt precipitation, making direct contact heat transfer with vapour unfeasible. As a solution, the study proposes the application of SSPCM-P in finned tube heat exchangers to circumvent chemical incompatibility issues with heat transfer fluid, leveraging its compact size, ease of preparation, and stacking capabilities. These pivotal findings present new industrial solutions for SSPCM preparation, promising significant technological advancements in energy storage and heat transfer.

Biomass-based shape-stable phase change materials supported by garlic peel-derived porous carbon for thermal energy storage

Form-stable phase change material embedded with chitosan-derived carbon aerogel

Multistage Porous Carbon Derived from Enzyme-Treated Waste Walnut Green Husk and Polyethylene Glycol for Phase Change Energy Storage

Shape-stable phase change composites based on carbonized waste pomelo peel for low-grade thermal energy storage

Experimental study on preparation and thermal storage properties of expanded graphite/paraffin wax as a shape-stabilized phase change material

Double-skeleton based shape-stabilized phase change materials with excellent solar-thermal energy conversion and shape memory performance

Enhanced solar/electric-to-thermal energy conversion capability of double skeleton based shape-stabilized phase change materials

Shape-stable composite phase change materials encapsulated by bio-based balsa wood for thermal energy storage

Sol-Gel Condensation of Temperature Sensitive and Shape Stabilized Phase Change Materials for Thermal Energy Storage

Preparation and characterization of shape-stable phase change particles: A new option for high-temperature thermal energy storage

Economical and shape-stabilized hydrated salt/bagasse biomass-derived carbon phase change composite for thermal energy storage

Shape-stable composite phase change materials encapsulated by lignin-based ordered porous carbon for thermal energy storage

Low cost, eco-friendly, modified fly ash-based shape-stabilized phase change material with enhanced thermal storage capacity and heat transfer efficiency for thermal energy storage

Design and Preparation of Novel Shapeable PEG/SiO2/AA Shape-Stabilized Phase Change Materials Based on Double-Locked Network with Enhanced Heat Storage Capacity for Thermal Energy Regulation and Storage

Improving the thermal energy storage capability of diatom-based biomass/polyethylene glycol composites phase change materials by artificial culture methods

Composite phase change materials of ultra-high molecular weight polyethylene/paraffin wax/carbon nanotubes with high performance and excellent shape stability for energy storage

Biomass porous carbon/polyethylene glycol shape-stable phase change composites for multi-source driven thermal energy conversion and storage

Shape stable phase change composites based on MXene/biomass-derived aerogel for solar–thermal energy conversion and storage

Green preparation and thermal properties of shape-stabilized paraffin/CS/SiO2 composite for phase change energy storage

Shape-stabilized nanosilver-modified grapefruit peel-based porous carbon composite phase change material with high thermal conductivity, photothermal conversion performance and thermal management capability

Preparation and characterization of a novel form-stable phase change material for thermal energy storage