Abstract:Monolithic shape-stabilized phase change materials (ss-PCM) are of great interest for energy-saving construction materials, solar-water heating systems and passive cooling systems of batteries and photovoltaic cells. However, the application range of ss-PCMs is currently limited by either low mechanical stabilities or low heat storage capacities. Therefore, we recently developed ss-PCMs based on silica and butyl stearate (BS) with high compressive strengths (1.2 MPa, 10 °C), but only moderate latent heats (∼100 J/g). Here, we focus on validating the applicability of our porogen-assisted sol-gel process to other organic PCMs apart from butyl stearate. To increase the latent heat of ss-PCMs, we create a mixture of 70% hexadecane (HD) or octadecane (OD) with 30% BS and combine this PCM mixture with our novel-sol-gel route to synthesize ss-PCMs with high compressive strengths (1.2 MPa, 5 °C) as well as high latent heats (160 J/g). Due to the well-interconnected silica matrix confining the paraffins, the ss-PCMs have 70% higher thermal conductivities (0.43 W/mK, 5 °C) than pure paraffins, high shape-stabilities (∼100%), high PCM loadings (83 wt%), and high chemical and long-term stabilities (>3000 thermal cycles). Moreover, they are thermally stable up to ∼170 °C with PCM melting points of 17 °C and 22 °C. We also synthesize ss-PCMs with pure polyethylene glycol 600 (PEG600) and pure acetamide (Ac) to analyze the effect of non-paraffinic PCMs on the physicochemical properties of ss-PCMs. These ss-PCMs have a ∼30% lower latent heat than expected because the PCM either reacts strongly by hydrogen bonding with the silica (PEG600) or was chemically degraded under the basic conditions during gelation (Ac). In contrast to the low compressive strength of shape-stabilized PEG600 (35 kPa, 5 °C), the ss-PCMs based on Ac have high compressive strengths (9.6 MPa, 5 °C). Moreover, they are translucent above the PCM melting point due to a nanoscopic silica matrix. The high supercooling effect (37 °C) and the moderate long-term stability (3000 thermal cycles, 20% lower latent heat) of shape-stabilized Ac restrict its application to special, glassy materials.

Design and Preparation of Novel Shapeable PEG/SiO2/AA Shape-Stabilized Phase Change Materials Based on Double-Locked Network with Enhanced Heat Storage Capacity for Thermal Energy Regulation and Storage

Sol-Gel Condensation of Temperature Sensitive and Shape Stabilized Phase Change Materials for Thermal Energy Storage

Double-skeleton based shape-stabilized phase change materials with excellent solar-thermal energy conversion and shape memory performance

Enhanced thermal properties of novel shape-stabilized PEG composite phase change materials with radial mesoporous silica sphere for thermal energy storage

Preparation and thermal properties of shape‐stabilized polyethylene glycol/mesoporous silica composite phase change materials for thermal energy storage

Thermal and Mechanical Robust Solid‐Solid Phase Change Materials Enabled by Reactive Crosslinkable Poly(Ethylene Glycol)s via Facile Thiol‐Ene Photo‐Click Chemistry

The Shape-Stabilized Phase Change Materials Composed Of Polyethylene Glycol And Various Mesoporous Matrices (Ac, Sba-15 And Mcm-41)

Synthesis and Properties of Dynamic Crosslinking Polyurethane/PEG Shape-Stable Phase Change Materials Based on the Diels–Alder Reaction

Shape–stabilized phase change materials composed of polyethylene glycol and ordered mesoporous silica synthesized from fly ash

Polyethylene glycol/silica (PEG@SiO2) composite inspired by the synthesis of mesoporous materials as shape-stabilized phase change material for energy storage

Preparation, Stability and Mechanical Property of Shape-Stabilized Phase Change Materials

Improving the thermal energy storage capability of diatom-based biomass/polyethylene glycol composites phase change materials by artificial culture methods

Carbon layer-modified mesoporous silica supporter for PEG to improve the thermal properties of composite phase change material

Efficient Shape-Stabilized Phase-Change Material Based on Novel Mesoporous Carbon Microspheres As a Matrix for Polyethylene Glycol: Preparation and Thermal Properties

Enhanced solar/electric-to-thermal energy conversion capability of double skeleton based shape-stabilized phase change materials

Shape-stabilization of organic phase change materials as mechanically stable silica boards with high latent heats synthesized via sol-gel route

Polyethylene Glycol Confined in SiO2-Modified Expanded Graphite as Novel Form-Stable Phase Change Materials for Thermal Energy Storage

Effects of carbonization temperature on the thermal characteristics of shape-stable composite phase change materials based on silica aerogel

Multiresponsive Shape-Adaptable Phase Change Materials with Cellulose Nanofiber/Graphene Nanoplatelet Hybrid-Coated Melamine Foam for Light/Electro-to-Thermal Energy Storage and Utilization

Polyethylene glycol/polypyrrole aerogel shape-stabilized phase change material for solar-thermal energy storage and thermoelectric power generation

A Facile and Simple Method for Preparation of Novel High-Efficient Form-Stable Phase Change Materials Using Biomimetic–Synthetic Polydopamine Microspheres As a Matrix for Thermal Energy Storage