Abstract:In this paper, an adaptive nonlinear control scheme has been proposed for implementing maximum torque per ampere (MTPA) control strategy corresponding to interior permanent magnet synchronous motor (IPMSM) drive. This control scheme is developed in the rotor d-q axis reference frame using adaptive input-output state feedback linearization (AIOFL) method. The drive system control stability is supported by Lyapunov theory. The motor inductances are online estimated by an estimation law obtained by AIOFL. The estimation errors of these parameters are proved to be asymptotically converged to zero. Based on minimizing the motor current amplitude, the MTPA control strategy is performed by using the nonlinear optimization technique while considering the online reference torque. The motor reference torque is generated by a conventional rotor speed PI controller. By performing MTPA control strategy, the generated online motor d-q reference currents were used in AIOFL controller to obtain the SV-PWM reference voltages and the online estimation of the motor d-q inductances. In addition, the stator resistance is online estimated using a conventional PI controller. Moreover, the rotor position is detected using the online estimation of the stator flux and online estimation of the motor q-axis inductance. Simulation and experimental results obtained prove the effectiveness and the capability of the proposed control method.

Mathematical Model for MTPA Control of Permanent-Magnet Synchronous Motor in Stator Flux Linkage Synchronous Frame

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Torque and Flux Weakening Control with MTPV for Interior Permanent Magnet Synchronous Motor

Accurate MTPA Strategy of PMSM Considering Cross Saturation Effect Based on Full-Flux-Linkage Model

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

Model predictive flux control for permanent magnet synchronous motor

Permanent Magnet Synchronous Motor Maximum Torque Per Ampere Control Based on Feedback Dissipative Realization

Sensorless-MTPA Control of Permanent Magnet Synchronous Motor Based on an Adaptive Sliding Mode Observer

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Power Perturbation Based Virtual Signal Injection Control of MTPA for IPMSM Drive System

MTPA control of mechanical sensorless IPMSM based on adaptive nonlinear control

Maximum-Torque-per-Square-Ampere Control for Interior PMSMs Considering Cross-Saturation Inductances

Analytical torque model for a permanent magnet spherical motor using magnetic field reconstruction from measured boundary conditions

Parameter Identification for Maximum Torque per Ampere Control of Permanent Magnet Synchronous Machines under Magnetic Saturation

Modeling, Analysis, and Suppression of Demagnetization for MTPA-Driven Permanent Magnet Motors With Distributed Windings

Model predictive combined vector and direct torque control of SM‐PMSM with MTPA and constant stator flux magnitude analysis in the stator flux reference frame

Nonlinear Magnetic Model of IPMSM Based on the Frozen Permeability Technique Utilized in Improved MTPA Control

MTPA Speed Control for IPMSM Drives Without Current Sensing

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Direct Torque Control Combined with Mtpa Concept for Open Winding Ipmsm

A MTPA Control Strategy for Mono-Inverter Multi-PMSM System