Abstract:The vector control of the permanent magnet synchronous motor (PMSM) is affected by cross-coupling, output delay, parameter mismatch, and other factors; thus, resulting in its poor steady-state and insufficient dynamic performance. To address these problems, the design proposed in this study adopts a model predictive current control strategy. In the traditional model predictive control, the absolute value of the difference between the predicted output current of the inverter and the reference current is used as the cost function instead of the minimum value of the valence function, i.e., the optimal solution of the system, and the best switching state is outputted. The design proposed in this study adopts the dual-vector model to predict the current control. Firstly, the reference voltage vector was predicted on basis of the deadbeat idea, which reduced the calculation burden of processor. Next, in order to further improve the stability of the system, a two-vectors duty cycle calculation method was introduced. Then, simplifies the selection range of the two voltage vectors. While ensuring the accuracy of the voltage vector, the control is reduced. Reduce the amount of calculation in the system, thereby improving its robustness. Finally, based on the principle of current vector tracking error minimization, the duration of the selected voltage vector was determined. Last but not the least, the control strategy is applied to the MTPA control to increase the operating efficiency of the control motor. The improved control strategy can effectively reduce the torque ripple and improve the dynamic and steady-state performance of the system. Simulation results verify the feasibility and effectiveness of the proposed control algorithm.

Model predictive combined vector and direct torque control of SM‐PMSM with MTPA and constant stator flux magnitude analysis in the stator flux reference frame

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Model predictive flux control for permanent magnet synchronous motor

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Torque and Flux Weakening Control with MTPV for Interior Permanent Magnet Synchronous Motor

Finite Control Set Model Predictive Torque Control With Reduced Computation Burden for PMSM Based on Discrete Space Vector Modulation

Predictive Torque Control for PMSM Based on Weighting Factor Elimination and Fast Voltage Vector Selection

Model predictive current control of surface‐mounted permanent magnet synchronous motor with low torque and current ripple

New model based predictive torque control algorithm in combination with duty ratio modulation strategy for flux-switching permanent magnet synchronous machines

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

Model Predictive Direct Duty-Cycle Control for PMSM Drive Systems With Variable Control Set

Computationally efficient multi‐step direct predictive torque control for surface‐mounted permanent magnet synchronous motor

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

Study on the direct torque control of permanent magnet synchronous motor drives

MTPA control of permanent magnet synchronous motor based on dual-vector model predictive control

Analysis of direct torque control in permanent magnet synchronous motor drives

A look-up table-based model predictive torque control of IPMSM drives with duty cycle optimization