Abstract:The vector control of the permanent magnet synchronous motor (PMSM) is affected by cross-coupling, output delay, parameter mismatch, and other factors; thus, resulting in its poor steady-state and insufficient dynamic performance. To address these problems, the design proposed in this study adopts a model predictive current control strategy. In the traditional model predictive control, the absolute value of the difference between the predicted output current of the inverter and the reference current is used as the cost function instead of the minimum value of the valence function, i.e., the optimal solution of the system, and the best switching state is outputted. The design proposed in this study adopts the dual-vector model to predict the current control. Firstly, the reference voltage vector was predicted on basis of the deadbeat idea, which reduced the calculation burden of processor. Next, in order to further improve the stability of the system, a two-vectors duty cycle calculation method was introduced. Then, simplifies the selection range of the two voltage vectors. While ensuring the accuracy of the voltage vector, the control is reduced. Reduce the amount of calculation in the system, thereby improving its robustness. Finally, based on the principle of current vector tracking error minimization, the duration of the selected voltage vector was determined. Last but not the least, the control strategy is applied to the MTPA control to increase the operating efficiency of the control motor. The improved control strategy can effectively reduce the torque ripple and improve the dynamic and steady-state performance of the system. Simulation results verify the feasibility and effectiveness of the proposed control algorithm.

A MTPA Control Strategy for Mono-Inverter Multi-PMSM System

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

Study on Switching Strategy of PMSM and BLDCM

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Power Perturbation Based Virtual Signal Injection Control of MTPA for IPMSM Drive System

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

Permanent Magnet Synchronous Motor Maximum Torque Per Ampere Control Based on Feedback Dissipative Realization

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Direct Torque Control Combined with Mtpa Concept for Open Winding Ipmsm

Control Strategy of High Performance IPMSM Drive in Wide Speed Range

MTPA control of permanent magnet synchronous motor based on dual-vector model predictive control

Sensorless-MTPA Control of Permanent Magnet Synchronous Motor Based on an Adaptive Sliding Mode Observer

Model predictive flux control for permanent magnet synchronous motor

Control of Interior Permanent Magnet Synchronous Motor Drives over a Wide Speed Range

Auto-Optimized Maximum Torque Per Ampere Control of IPMSM Using Dual Control for Exploration and Exploitation

Accurate MTPA Strategy of PMSM Considering Cross Saturation Effect Based on Full-Flux-Linkage Model

A Robust MTPA Controller for High Efficiency IPM Synchronous Motor

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Research on MTPA Control Strategy of Permanent Magnet Synchronous Motor Based on Fast SVPWM Algorithm