Abstract:We report on the kinetics of pyrolysis of bark wood of four coniferous tree species: fir (Abies sibirica), larch (Larix sibirica), spruce (Picea obovata), and cedar (Pinus sibirica) denoted as FB, LB, SB, and CB, respectively. Thermogravimetry (TG) and differential scanning calorimetry (DSC) methods were used to study the influence of KCl and K3PO4 compounds on the process of thermal decomposition of fir bark and determine the main thermal effects accompanying this process. As a result of the studies carried out, it was found that KCl additives practically do not affect the decomposition of hemicelluloses, but they shift the maximum decomposition of the cellulose peak in the direction of decreasing temperature to 340.9 °C compared to untreated bark (357.5 °C). K3PO4 promotes the simultaneous decomposition of hemicelluloses and cellulose in the temperature range with a maximum of 277.8 °C. In both cases, the additions of KCl and K3PO4 reduce the maximum rate of weight loss, which leads to a higher yield of carbon residues: the yield of char from the original fir bark is 28.2%, in the presence of K3PO4 and KCl it is 52.6 and 65.0%, respectively. Using the thermogravimetric analysis in the inert atmosphere, the reaction mechanism has been established within the Criado model. It is shown that the LB, SB, and CB thermal decomposition can be described by a two-dimensional diffusion reaction (D2) in a wide range (up to 0.5) of conversion values followed by the reactions with orders of three (R3). The thermal decomposition of the FB occurs somewhat differently. The diffusion mechanism (D2) of the FB thermal decomposition continues until a conversion value of 0.6. As the temperature increases, the degradation of the FB sample tends to R3. It has been found by the thermogravimetric analysis that the higher cellulose content prevents the degradation of wood. The bark wood pyrolysis activation energy has been calculated within the Coats–Redfern and Arrhenius models. The activation energies obtained within these models agree well and can be used to understand the complexity of biomass decomposition.

Analysis of thermogravimetric data for different forms of wood

Kinetic Analysis on Non-isothermal Combustion of Several Urban Biomass Fuels

Nonisothermal Thermogravimetric Kinetic Investigations On Combustion Behaviors Of Concomitant Biomass From Urban Plants

Combustion Characteristics and Kinetic Analysis of Biomass Pellet Fuel Using Thermogravimetric Analysis

Kinetic study on thermal decomposition of woods in oxidative environment

Evaluation of Kinetic and Thermodynamic Parameters of Pyrolysis and Combustion Processes for Bamboo Using Thermogravimetric Analysis

Kinetic and quantitative analysis of gaseous products of thermochemical biomass conversion based on thermogravimetric and mass‐spectrometric data

Friction and Shear Properties of Pine Biomass and Pellets

Thermal and kinetic analyzing of pyrolysis and combustion of self-heating biomass particles

Thermal Decomposition and Kinetic Parameters of Three Biomass Feedstocks for the Performance of the Gasification Process Using a Thermogravimetric Analyzer

Thermodynamic Analysis of Fischer-Tropsch Fuels from Biomass

TGA and kinetic study of different torrefaction conditions of wood biomass under air and oxy-fuel combustion atmospheres

KINETIC STUDY OF PINE SAWDUST PYROLYSIS VIA TG/DTG ANALYSIS

Investigation of combustion kinetics of treated and untreated waste wood samples with thermogravimetric analysis

Thermogravimetric Analysis of Pinus Wood For Kinetic Analysis by Using Coats and Redfern Method

THERMAL ANALYSIS OF SWITCHGRASS (PANICUM VIRGATUM L.) GROWN ON RECLAIMED LANDS

Thermogravimetric Analysis of Solid Biofuels with Additive under Air Atmosphere

Thermogravimetric analysis and reaction kinetics of lignocellulosic biomass pyrolysis

Kinetic Study of Pyrolysis of Coniferous Bark Wood and Modified Fir Bark Wood

Study of Combustion Characteristics and Kinetics of Agriculture Briquette Using Thermogravimetric Analysis