Abstract:The resurgence of electromobility drives the need for high energy density cathode materials. LiNiO 2 (LNO) meets this demand, based on its high specific capacity in a narrow voltage range and without relying on scare elements. Yet, it has been plagued by various issues, such as poor cycling performance and thermal instability. Adding dopants, such as widely available Mg 2+ , is a common strategy to balance cycling performance and energy density. Most prior studies focused on large Mg content ranges and were based on laboratory X-ray diffraction. Hence, the influence of Mg 2+ addition on the crystal structure remains ambiguous, especially when small amounts are used (≤ 5 mol%; particularly interesting for industrial applications). Here, we present a systematic study of LiNi 1− y Mg y O 2 (0 ≤ y ≤ 0.05) investigated by high-resolution synchrotron-based X-ray diffraction combined with elemental analysis, electron microscopy and electrochemical testing. The synthetic route relies on the addition of 10 nm Mg(OH) 2 nanoparticles prior to the final calcination, as well as on co-precipitation. It is found that Mg 2+ mostly occupies the Ni site until saturating at ∼1.7%, then the Li site becomes preferred. This trend in the site occupancies influences the lattice parameters, oxygen coordinate within the unit cell and Ni–O bond distances. Doping also modifies the electrochemical behavior as a cathode material, stabilizing the capacity retention during cycling but sacrificing specific discharge capacity. Laboratory-based operando X-ray diffraction reveals that the increase in capacity retention is due to the suppression of the H2-H3 phase transition and interlayer distance collapse already in 3% Mg-doped LNO. The combination of structural and electrochemical characterization of doped LNO provides useful insights into the structural chemistry of the Mg 2+ dopant and can serve as a starting point to understand Mg as a component in multiple dopant strategies for cathode material design and application.

Magnesium Substitution in Ni‐Rich NMC Layered Cathodes for High‐Energy Lithium Ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Elucidation of Synergistic Effect of Mg-co-doping on Electrochemical Performance of Mn-doped LiNiO2

Stabilizing the High-Voltage Cycle Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material by Mg Doping

Regulating the internal structure by magnesium doping to enhance cycle stability of full-concentration-gradient Ni-rich layered cathodes

Reinforcing electrochemical performance of Ni‐rich NCM cathode co‐modified by mg‐doping and Li3PO4‐coating

Synergistically regulating the structural tolerance of Co-free Ni-rich cathode materials at high-rate through multi-heteroatoms substitution

Structural and Electrochemical Properties of Mg-doped Nickel Based Cathode Materials LiNi0.6Co0.2Mn0.2−xMgxO2for Lithium Ion Batteries

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

Tracing Low Amounts of Mg in the Doped Cathode Active Material LiNiO 2

Development and understanding of the lithiation/de-lithiation mechanism of a low cobalt and nickel-rich cathode material for lithium‐ion batteries

An Mg–Al dual doping strategy to enhance the structural stability and long cycle life of LiNi0.8Co0.1Mn0.1O2 cathode material

Bulk Mg-doping and Surface Polypyrrole-Coating Enable High-Rate and Long-Life for Ni-rich Layered Cathodes

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Relieving capacity decay and voltage fading of Li1.2Ni0.13Co0.13Mn0.54O2 by Mg2+ and PO43- dual doping

Substantial Doping Engineering in Layered LiNi 0.5+x Co 0.2−x Mn 0.3 O 2 Materials for Lithium-Ion Batteries

Effects of Mg Doping at Different Positions in Li-Rich Mn-Based Cathode Material on Electrochemical Performance

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries

High-Ni NMC Cathode Material with Concentration Gradients in Lithium-Ion Batteries

Excellent Rate Capability of Mg Doped Li[Li0.2Ni0.13Co0.13Mn0.54]O2 Cathode Material for Lithium-Ion Battery