Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Rolling element bearings are the most important components in almost all rotating machines. These bearings are often subjected to repetitive load cycles at different operating conditions. Excessive loads, speeds, and improper operating conditions lead to the propagation of defects on their load-bearing surfaces, thereby causing a negative impact on the performance of rotating machines. This paper presents the results of experimental investigations to assess wear propagation in roller bearings using lubricant degradation, vibration, and statistical parameter analysis methods. A roller bearing setup was developed in the laboratory, and the test bearing (NJ 307E) was subjected to fatigue tests over a period of 900 h. The bearing was operated at a speed and radial load of 800 rpm and 1 kN, respectively. The film thickness analysis revealed a transition in lubrication regimes during 600–900 h of operation. Grease structure degradation and oxidation analyses were carried out using scanning electron microscope images and the Fourier transform infrared radiation technique. Further, the vibration signals are extracted from the bearing housing at regular intervals. Using the fast Fourier transform technique, these vibration signals were used to analyze bearing fault frequencies to highlight the faults developed on bearing contact surfaces. The statistical features of vibration signals such as root mean square, kurtosis, and crest factor were used to assess the severity of wear propagated on the bearing contact surfaces. Integrating tribological and vibration parameter analysis techniques provided a reliable assessment of surface fatigue wear propagated on the roller-bearing contact surfaces.

Weibull Distribution to Evaluate the Reliability of PEEK Thrust Bearings under Rolling Contact Fatigue in Water

Influence of Radial Load on PEEK Plastic Bearings Life Cycle under Water Lubricated Conditions

Relationship between Load, Rotation Speed and, Strength in All - PEEK and PEEK Race – PTFE Retainer Hybrid Polymer Bearings under Dry Rolling Contact Fatigue

Comparative Study on Surface Contact Fatigue of Machine Tool Bearing Raceways with Different Rolling Elements: Two Failure Bearings Case Studies

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes

Effect of PTFE Retainer on Friction Coefficient in Polymer Thrust Bearings under Dry Contact

Friction Coefficient and Wear of PEEK-PTFE Hybrid Radial Ball Bearings under Dry Conditions

A New Proposed Weibull Distribution of Inclusion Size and Its Correlation with Rolling Contact Fatigue Life of an Extra Clean Bearing Steel

Reliability assessment of PEEK/17-4PH stainless steel tribopair under seawater lubrication

Relative Fatigue Life Prediction of High-Speed and Heavy-Load Ball Bearing Based on Surface Texture

Study of Friction and Wear Characteristics of PEEK by Reciprocating Sliding Experiment and Temperature Dependences Simulation

Experimental investigations to assess surface fatigue failure in rolling contact bearing

Influencing Factors of Fatigue Life for Rolling Bearings

Study on predicting rolling contact fatigue of pitch bearing raceway in offshore wind turbine

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings

Fatigue life and fatigue reliability mechanism of ball bearings

Derivative Analysis and Evaluation of Roll-slip Fretting Wear Mechanism of Ultra-thin-walled Bearings under High Service

An Experimental Investigation on the Wear of Lubricated Steel Against PEEK Gears

Characterization of Machined Surface Quality and Near-Surface Microstructure of a High Speed Thrust Angular Contact Ball Bearing

Performance of a Direct Bonded Sub-Millimeter Peek Coating for Hydrodynamic Plain Bearings

Loading Capacity of PEEK Blends in Terms of Wear Rate and Temperature