Abstract:Tungsten (W) has been selected as the divertor material in ITER based on its promising thermal and mechanical properties. Despite these advantages, continued investigation has revealed W to undergo extreme surface morphology evolution in response to relevant fusion operating conditions. These complications spur the need for further exploration of W and other innovative plasma facing components (PFCs) for future fusion devices. Recent literature has shown that alloying of W with other refractory metals, such as tantalum (Ta), results in the enhancement of key PFC properties including, but not limited to, ductility, hydrogen isotope retention, and helium ion (He+) radiation tolerance. In the present study, pure W and W–Ta alloys are exposed to simultaneous and sequential low energy, He+ and deuterium (D+) ion beam irradiations at high (1223 K) and low (523 K) temperatures. The goal of this study is to cultivate a complete understanding of the synergistic effects induced by dual and sequential ion irradiation on W and W–Ta alloy surface morphology evolution. For the dual ion beam experiments, W and W–Ta samples were subjected to four different He+: D+ ion ratios (100% He+, 60% D+ + 40% He+, 90% D+ + 10% He+ and 100% D+) having a total constant He+ fluence of 6 × 1024 ion m−2. The W and W–Ta samples both exhibit the expected damaged surfaces under the 100% He+ irradiation, but as the ratio of D+/He+ ions increases there is a clear suppression of the surface morphology at high temperatures. This observation is supported by the sequential experiments, which show a similar suppression of surface morphology when W and W–Ta samples are first exposed to low energy He+ irradiation and then exposed to subsequent low energy D+ irradiation at high temperatures. Interestingly, this morphology suppression is not observed at low temperatures, implying there is a D–W interaction mechanism which is dependent on temperature that is driving the suppression of the microstructure evolution in both the pure W and W–Ta alloys. Minor irradiation tolerance enhancement in the performance of the W–Ta samples is also observed.

Activation and transmutation of tungsten boride shields in a spherical tokamak

Tungsten boride shields in a spherical tokamak

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Shielding materials in the compact spherical tokamak

Power and isotope effects in the ITER Baseline Scenario with tungsten and tungsten-equivalent radiators in DIII-D

Boriding of tungsten by the powder-pack process: Phase formation, growth kinetics and enhanced neutron shielding

Suppression of surface microstructure evolution in W and W–Ta alloys during simultaneous and sequential He and D ion irradiation in fusion relevant conditions

Tritium Breeder Layer Evaluation of Fusion-Fission Hybrid System

A high temperature W$_2$B cermet for compact neutron shielding

Boron Carbide as High-Energy Radiation Shielding Material for ITER

Response of yttria dispersion strengthened tungsten simultaneously exposed to steady-state and transient hydrogen plasma

Fabrication of neutron absorbing metal hydride entrained ceramic matrix shield composites

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design

Potential Plasma Facing Materials: A Case Study on CeB6 Particulate Reinforced W–1Ni Matrix Composites Produced Via Different Sintering Techniques

Highly porous tungsten for plasma-facing applications in nuclear fusion power plants: a computational analysis of hollow nanoparticles

Development of irradiation tolerant tungsten alloys for high temperature nuclear applications

Tungsten-based composite materials for fusion reactor shields

Activation and Environmental Aspects of In-Vacuum Vessel Components of CFETR

Monte Carlo simulations of pure tungsten and advanced “smart” tungsten alloys under helium bombardment for future fusion power plants

Spatially dependent cluster dynamics model of He plasma surface interaction in tungsten for fusion relevant conditions