Abstract:To reveal the deformation mechanism during tunneling in deep soft ground, triaxial unloading confining pressure tests and triaxial unloading creep tests were carried out on sandy mudstone specimens to study the dilatancy and fracturing behavior of soft rock. In the triaxial unloading confining pressure tests, the stress path and different unloading rates were considered to reflect the unloading characteristics of the excavation methods. The unloading rate effects and the rock damage evolution law are studied. The following conclusions are obtained from the results. Firstly, when the unloading rate is smooth, the peak strengths and deviatoric stress–strain curves under the unloading condition are close to those under the conventional loading condition. Secondly, the post-peak brittle characteristics are more apparent with the increasing unloading rates. Thirdly, the soft rock undergoes five deformation and failure regimes of elasticity, pre-peak unloading damage–dilatancy, post-peak brittle drop, linear strain softening and residual perfect plasticity under quasi-static smooth unloading of mechanized excavation which is mainly focused on in this study. Fourthly, the damage evolution law at the pre-peak damage–dilatancy stage follows an exponential function. Fifthly, during the post-peak stages, multistage microfractures are initiated, propagated and finally coalesced forming a shear-fragmentation band with a certain thickness, accompanied by significant volumetric dilatancy. In the triaxial unloading creep tests, multistep unloading of the confining pressure was applied, while the axial pressure was kept constant. The results show that when the deviatoric stress is larger and the experienced creep time is longer, the unloading effect and creep characteristics become more apparent accompanied with obvious lateral dilatancy, eventually leading to significant creep–dilatancy. The progressive failure with time is caused by the damage accumulating with time-dependent crack expansion, which can be called as ‘time-dependent damage and fracturing’. The reasons for the above evolution process are presented, then the deformation mechanism of soft rock is revealed. The soft rock deformation mainly consists of two parts. One part is the pre-peak damage–dilatancy and post-peak fracture–bulking produced at the excavation unloading instant. The other part is creep–dilatancy caused by time-dependent damage and fracturing in a period of time after excavation. The above-mentioned results of damage, dilatancy and fractures evolution process are in good agreement with the in situ monitoring results and previous studies about the surrounding rock convergence, fracturing and EDZ (excavation damaged zone) development.

Load Transfer Behavior During Cascading Pillar Failure: An Experimental Study

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Numerical and theoretical analysis of multi-pillar instability under elastic beams

Experimental Study of Mechanical Behavior of Interlayer Staggered Zone under Cyclic Loading and Unloading Condition

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Experimental Study on Failure Mechanism of Soft Rock-Coal Bodies in Abandoned Mines under Cyclic Dynamic Loading

Instantaneous and long-term deformation characteristics of deep room-pillar system induced by pillar recovery

Numerical Study of Failure Mechanism of Serial and Parallel Rock Pillars

Strength Reduction of Initial High-Stress Rock Pillars Under Different Triaxial Unloading Paths

Failure Characteristics and the Damage Evolution of a Composite Bearing Structure in Pillar-Side Cemented Paste Backfilling

Fracturing Behaviors and Mechanism of Serial Coal Pillar Specimens with Different Strength.

Mechanical behaviour and instability mechanism of sandstones with impact tendency under different loading paths

Study on Progressive Instability Characteristics of Coal-Rock Composite Structure with the Different Height Ratios

Assessment of pillar stability and its control in a double roadway layout

Experimental study on the movement law of overlying rock non-pillar coal overhead mining

Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam

Study on the Stability of Coal Pillars in a Gob-Side Two-Entry Arrangement of Different Layers in Fully Mechanized Caving and the Zonal Linkage Control of "Heteromorphic" Surrounding Rock

Behaviour analysis on the vertically loaded bored pile socketed into weak rocks using slip-line theory arc failure surface

Experimental Study on the Dilatancy and Fracturing Behavior of Soft Rock Under Unloading Conditions

Analytical and Numerical Study on the Pillar Rockbursts Mechanism

Determination of the stability of residual pillars in a room-and-pillar mining goaf under eccentric load