Abstract:Jointed structures are ubiquitous constituents of engineering systems; however, their dynamic properties (e.g., natural frequencies and damping ratios) are challenging to identify correctly due to the complex, nonlinear nature of interfaces. This research seeks to extend the efficacy of traditional experimental methods for linear system identification (such as impact testing, shaker ringdown testing, random excitation, and force or amplitude-control stepped sine testing) on nonlinear jointed systems, e.g., the half Brake–Reuß beam, by augmenting them with full-field data collected by high-speed videography. The full-field response is acquired using high-speed cameras combined with Digital Image Correlation (DIC), which enables studying the spatial–temporal dynamic characteristics of the system. As this is a video-based experiment, additional constraints are attached to the beam at the node points to remove the rigid body motion, which ensures that the beam is in the view of the camera during the entire test. The use of a video-based method introduces new sources of experimental error, such as noise from the high-speed camera's fan and electrical noise, and so the measurement accuracy of DIC is validated using accelerometer data. After validating the DIC data, the measurements are recorded for several types of excitation, including hammer testing, shaker ringdown testing, fixed sine testing, and stepped sine testing. Using the DIC data to augment standard nonlinear system identification techniques, modal coupling and the mode shapes' evolution are investigated. The suitability of videography methods for nonlinear system identification of nonlinear beams is explored for the first time in this paper, and recommendations for techniques to facilitate this process are made. This article focuses on developing an accurate data collection methodology as well as recommendations for nonlinear testing with DIC, which paves the way for video-based investigation of nonlinear system identification. In Part-II (Jin et al., 2021) of this work, the same data set is used for a rigorous assessment of nonlinear system identification with full-field DIC data.

Comparative Assessment of Frequency Dependent Joint Properties Using Direct and Inverse Identification Methods

Comparative Assessment of Multi-Axis Bushing Properties Using Resonant and Non-Resonant Methods

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

A Joint Stiffness Identification Method Based on Finite Element Modeling and Frequency Response Functions

Joint Dynamic Properties Identification with Partially Measured Frequency Response Function

An Integrated Joint Dynamics System for Elastically Jointed Structures

Non-linear joint dynamics and controls of jointed flexible structures with active and viscoelastic joint actuators

Identification of Instantaneous Frequency and Damping From Transient Decay Data

Identification of Robot Joint Torsional Stiffness Based on the Amplitude of the Frequency Response of Asynchronous Data

Comparison of Nonlinear System Identification Methods for Free Decay Measurements with Application to Jointed Structures

Measurement and identification of the nonlinear dynamics of a jointed structure using full-field data; Part II - Nonlinear system identification

Joint Identification through Hybrid Models Improved by Correlations

Method for instrumentation of orthotic joints for measurement of internal joint loads

A Practical Inverse Identification of Johnson–Cook Parameters at Intermediate Strain Rates Using Split Hopkinson Pressure Bar Test

Damage Assessment Of Structural Joints Using System Identification Techniques

Identifying Joint Dynamics in Bolted Cantilevered Systems Under Varying Tightening Torques and Torsional Excitations

Inverse material identification in coupled acoustic-structure interaction using a modified error in constitutive equation functional

Introducing an innovative FRF-based method for identification of an adhesive joint characteristics

Measurement and identification of the nonlinear dynamics of a jointed structure using full-field data, Part I: Measurement of nonlinear dynamics

A Comparative Study Of Direct And Iterative Inversion Approaches To Determine The Spatial Shear Modulus Distribution Of Elastic Solids

Hyperelastic constitutive model parameters identification using optical-based techniques and hybrid optimisation