Abstract:Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser process parameters, including laser power density and scanning rate. Adjusting the parameters to input the appropriate heat, so that the high quality graphene can be obtained in an optimal condition. The influence of carbon source on graphene growth was also investigated. Ultimately, the penetration and precipitation mechanism of carbon into Ni substrate during the fabrication process were also discussed. This approach may reach the scale large enough for practical applications.Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser ...

Precise Control of the Number of Layers of Graphene by Picosecond Laser Thinning

Miraculous Light Enabling Processing of Magic Materials

Thinning of Large-Area Graphene Film from Multilayer to Bilayer with a Low-Power CO2 Laser.

Sub-diffraction Optical Beam Lithography Based on a Center-Non-zero Depletion Laser

A New Route to Graphene Layers by Selective Laser Ablation

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

Layer-By-Layer Thinning of Graphene by Plasma Irradiation and Post-Annealing

Customizing the Reduction of Individual Graphene Oxide Flakes for Precise Work Function Tuning with Mev Precision

Ablation threshold, structural modification, and sensing of graphene oxide thin film induced by UV nanosecond laser

Tunable Graphene Oxide Reduction and Graphene Patterning at Room Temperature on Arbitrary Substrates

Nanomanufacturing of Graphene Nanosheets Through Nano-Hole Opening and Closing

Selective etching of multilayer graphene with ultra-low impact energy oxygen ions

Laser Thinning and Patterning of MoS2 with Layer-by-Layer Precision

Laser Exfoliation of Graphene from Graphite

Direct Laser Fabrication of Large-Area Graphene: an Engineering Approach to Nano-Materials

Laser Liftoff Enabled Batch Fabrication of Ultrathin Graphene Hall Devices

Study on reduction of graphene oxide films using picosecond laser direct writing

Laser-Scribing Technology for Wafer-Scale Graphene Devices

Layer-by-Layer Removal of Graphene for Device Patterning

Laser Controllable Growth of Graphene Via Ni-Cu Alloy Composition Modulation

Controllable photoexfoliation of monolayer graphene quantum dots using temporally and spatially shaped femtosecond laser