Catalytic Hydrocracking Reactions of Tetralin Biomass Tar Model Compound to Benzene, Toluene and Xylenes (BTX) Over Metal-Modified ZSM-5 in Ambient Pressure Reactor

Andrii Kostyniuk,David Bajec,Blaž Likozar
DOI: https://doi.org/10.2139/ssrn.3972745
2021-01-01
SSRN Electronic Journal
Abstract:The tetralin hydrocracking process into benzene, toluene, and xylenes (BTX) was investigated over metal-modified (Ga, Nb, Ni, NiMo, Sn, W, Zr or H3[P(W3O10)4])/ZSM-5 zeolite catalysts, mechanism were analysed, and compared with a pristine microporous material in a packed bed reactor under applied atmospheric pressure (p). This experimental study presents an investigation of the metal-promoted ZSM-5 for the BTX production under the ambient p for the first continuously-operated time. It is demonstrated that metal-wise there are no significant improvements in the formation of BTX. The yield of 43 mol. % towards BTX over the parent HZSM-5 (SiO2/Al2O3= 30) at 420°C after 4 h on time on stream (TOS) was achieved, while methane, ethylene, ethane, propylene and propane were main gas products. Simultaneously, 5wt.%Zr/ZSM-5 possessed the highest kinetic stability, activity, and was selective (SBTX= 24 mol.%; TOS = 25 h; 370°C) due to the low diffusion thermomigration of the Zr species into framework. The outstanding functional performance of HZSM-5 was mainly ascribed to structure, its high dealkylation and a measured large amount of the solid surface area in tandem with the porosity, protonating total Brønsted (BAS)/Lewis (LAS) acidity and BAS/LAS ratio. However, BTX dropped drastically with increasing TOS due to coke. It was found that HZSM-5 was the most affected within studied reaction conditions, but could be easily regenerated with preserving realistic catalytic chemistry. The pathway of cracking was proposed. All these findings shed light, on how the incorporation of different metals affects BTX selectivity.
What problem does this paper attempt to address?