Abstract:Refractory metal carbides TiC, ZrC, HfC, NbC and TaC have excellent physical, chemical and mechanical properties as materials for ultra-high temperature ceramics. Of these, the most refractory are TaC and HfC, whose melting points approach 4000°C. It should be noted the high hardness, strength and wear resistance of refractory carbides. Hence, there is a natural interest in high-entropy carbides based on them, which are becoming an important class of new ceramic materials, since they potentially have more advanced applied properties. However, obtaining such materials by classical metallurgical methods is a difficult task. In modern research, samples of high-entropy carbides are most often synthesized using expensive special equipment (methods of plasma-spark sintering, high-energy planetary mills, etc.) and a relatively long preparation of precursors for sample production. This paper describes a new approach to the synthesis of multicomponent carbide (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C using an electrochemical process at a temperature not exceeding 1173 K. The method is based on the phenomenon of currentless metal transfer in molten salts. After the step-by-step transfer of metals, the sample was washed from the electrolyte, then sintered in a vacuum furnace. According to X-ray phase analysis, the resulting high-entropy carbide is a single-phase solid solution with an FCC structure. The diffraction pattern of the synthesized sample is in good agreement with the calculated diffraction pattern obtained by the Debye formula for a supercell of 64 000 atoms. A compact sample of high-entropy carbide was produced by pressing a tablet 10 mm in diameter with the addition of cobalt as a matrix metal. After vacuum sintering, the sample was ground to prepare for examination on a scanning electron microscope. Elemental mapping of the sample surface was performed, which showed a satisfactory distribution of metals that make up the high-entropy carbide. The measured microhardness of the sample turned out to be less than the values found in the publications of other authors, which may be due to some residual sample porosity.

Phase controlled synthesis of transition metal carbide nanocrystals by ultrafast flash Joule heating

Synthesis of Metastable Ternary Pd-W and Pd-Mo Transition Metal Carbide Nanomaterials

Rapid Synthesis of Size-Tunable Transition Metal Carbide Nanodots under Ambient Condition

Atomic-Scale Mechanism on Nucleation and Growth of Mo2c Nanoparticles Revealed by in Situ Transmission Electron Microscopy

PRODUCING METHOD OF HIGH ENTROPY CARBIDE IN AN IONIC MELT

Room Temperature Ion Beam Synthesis of Ultra-Fine Molybdenum Carbide Nanoparticles: Toward a Scalable Fabrication Route for Earth-Abundant Electrodes

Facile Synthesis of Uniform Metal Carbide Nanoparticles from MOFs by Laser Metallurgy.

Flash Joule Heating-Boro/Carbothermal Reduction (FJH-BCTR): An approach for the instantaneous synthesis of transition metal diborides

Synthesis and characterization of ceramic high entropy carbide thin films from the Cr-Hf-Mo-Ta-W refractory metal system

Low-temperature Rapid Synthesis of Ultrafine Hafnium Carbide Ceramic Powders

Study on the rapid synthesis of high-entropy carbonitride powder and its remarkable hardening effects on cemented carbide tool materials

General Fabrication of Boride, Carbide, and Nitride Nanocrystals Via a Metal-Hydrolysis-Assisted Process.

Catalytic synthesis of one-dimensional nanomaterials in seconds

Large‐Scale Synthesis of Multifunctional Single‐Phase Co2C Nanomaterials

Synthesis of transition metal carbide nanoparticles through melamine and metal oxides

From single high-entropy phase to multi-phase transition: Microstructural evolution of multi-component carbide (ZrHfVNbMoW)C realized by adjusting Hf content and temperature

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

The Phase Decomposition in Non-Equimolar (zrhfvnbmow)cx Complex Concentrated Carbides Via Carbon Content Regulation

Synthesis of nanocrystalline molybdenum carbide materials and their characterization

Laser-sculptured Ultrathin Transition Metal Carbide Layers for Energy Storage and Energy Harvesting Applications

Graphene-confined ultrafast radiant heating for high-loading subnanometer metal cluster catalysts