Abstract:This paper presents the findings of the research aimed at developing computer models to determine the operating conditions in electric power systems (EPSs) feeding DC and AC railway substations. The object of the research is an EPS with a predominant traction load whose high-voltage power lines are connected to transformer and converter substations with 3 kV and 27.5 kV traction networks. The supply network includes 110 kV and 220 kV power lines. The EPS operating parameters are calculated based on the decomposition of the system into alternating and direct current segments. Calculations are performed for the fundamental frequency and high harmonic frequencies. The modeling technique is universal and can be used to determine the operating parameters and power quality indices for any configuration of an EPS and various designs of traction networks. With this technique, one can solve numerous additional problems, such as calculating the processes of ice melting in traction networks and power lines, determining electromagnetic field strengths, and assessing the heating of power line wires and catenary suspensions. The results obtained show that the voltages on the current collectors are within acceptable limits for all AC and DC electric locomotives. The levels of asymmetry on the 110 and 220 kV tires of traction substations (TP) do not exceed the normally permissible values. The values of the asymmetry coefficients for DC TP are tenths of a percent. With an increase in the size of traffic and in post-emergency conditions caused by the disconnection of communication between one of the support substations and the EPS, the asymmetry indicators on the 220 kV buses of AC substations may exceed the permissible limits. Phase-controlled reactive power sources can be used to reduce them. The analysis of the results of the determination of non-sinusoidal modes allows us to formulate the conclusion that the values of harmonic distortion go beyond the normative limits. Passive and active filters of higher harmonics can be used to normalize them. Calculations of thermal modes of traction transformers show that the temperatures of the most heated points do not exceed acceptable values.

Power supply for a CIP position for bearings

Selection of power supply scheme for controlled excitation converters in traction electric motors of single-phase DC electric locomotives

Exponential Curve-Based Control Strategy for Auxiliary Equipment Power Supply Systems in Railways

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Multi-Application Strategy Based on Railway Static Power Conditioner with Energy Storage System

Power Flow Algorithm for Traction Power Supply System of Electric Railway Based on Locomotive and Network Coupling

Multi-Port and -Functional Power Conditioner and Its Control Strategy with Renewable Energy Access for a Railway Traction System

Simulation and Analysis Method for the Operation Characteristics of CIT400 High-Speed Comprehensive Inspection Train Based on Predictive Current Control

High-speed Traction Power Supply System Modeling and the Simulation Analysis

Improving the Efficiency of the Electric Locomotive Drive with a Controllable Converter for Traction Motor Excitation

Modelling and control of a novel AT-fed co-phase traction power supply system for electrified railway

An Analysis of Damages Inflicted to the Bearing of Rolling Stock Traction Machines Powered by Frequency and Voltage Converters

A Novel Power Electronic Autotransformer-Based Bipolar MVDC Electrified Railway System

Modeling the Operating Conditions of Electric Power Systems Feeding DC and AC Traction Substations

Power Electronic Transformer based IGBT Converters for Electric Locomotive Applications

An Energy Storage-Based Railway Power Flow Controller With Partial Compensation Strategy

Analysis, design and control of a hybrid railway power conditioner considering power rating reduction

DC Traction Power Supply System Based on Modular Multilevel Converter Suitable for Energy Feeding and De-Icing

Power Flow Optimization and Control Strategy for Energy Router in Dual Mode Traction Power Supply System

Study of the simulation of DC traction power supply system based on AC/DC unified Newton-Raphson method

A Multiple Independent-Load Output Capacitive Power Transfer System with High Coupler Misalignment-Tolerance for Railway Applications