Abstract:The existing problems of the traction power-supply system (i.e., the existence of the neutral section and the power quality problems) limit the development of railways, especially high-speed railways, which are developing rapidly worldwide. The existence of the neutral section leads to the speed loss and traction loss as well as mechanical failures, all of which threaten the fast and safe operation of the train and the system. Meanwhile, the power quality problems (e.g., the negative sequence current, the reactive power, and the harmonic) can bring a series of problems that cannot be ignored on the three-phase grid side. In response, many researchers have proposed co-phase power-supply schemes to solve these two problems simultaneously. Given that the auto-transformer (AT) power-supply mode has become the main power-supply mode for the high-speed railway traction power-supply system, it has a bright future following the rapid development of the high-speed railway. In addition, there is no co-phase power-supply scheme designed for AT power-supply mode in the existing schemes. Therefore, the main contribution of this paper is to propose a specifically designed power-supply mode more suitable for the AT, as well as to establish the control systems for the rectifier side and the inverter side. In addition, for the proposed scheme, the operation principle is analyzed, the mathematical model is built, and the control system is created, and its functionality is verified by simulation, and its advantages are compared and summarized finally. The result proves that it can meet functional requirements. At the same time, compared with the existing co-phase power-supply scheme, it saves an auto-transformer in terms of topology, reduces the current stress by 10.9% in terms of the current stress of the switching device, and reduces the power loss by 0.25% in terms of the entire system power loss, which will result in a larger amount of electricity being saved. All of this makes it a more suitable co-phase power-supply scheme for the AT power-supply mode.

Study of the simulation of DC traction power supply system based on AC/DC unified Newton-Raphson method

Digital-twin Based Power Supply System Modeling and Analysis for Urban Rail Transportation

Power Flow Algorithm for Traction Power Supply System of Electric Railway Based on Locomotive and Network Coupling

Simulation of Traction Power Supply System Based on Two Different Rectifiers

A Novel Co-Phase Power-Supply System Based on Modular Multilevel Converter for High-Speed Railway AT Traction Power-Supply System

The Modeling and Simulation of DC Traction Power Supply Network for Urban Rail Transit Based on Simulink

Research on Short-Circuit Characteristics of Subway DC Traction Power Supply System

Load Modeling of CRH3 Electric Multiple Unit Traction Drive System

Multiresolution Models of DC Traction Power Supply Systems With Reversible Substations

DC Autotransformer-Based Traction Power Supply for Urban Transit Rail Potential and Stray Current Mitigation

Urban Rail System Modeling and Simulation Based on Dynamic Train Density

Multi-Application Strategy Based on Railway Static Power Conditioner with Energy Storage System

Real-Time Tracking of Substation's Feeder Current Based on Traction Calculation

Modelling and control of a novel AT-fed co-phase traction power supply system for electrified railway

Analytic Harmonic Model of 12 Pulse Rectifier in Urban Rail Transit Traction Power Supply System

Analysis of short-circuit model for DC traction supply system

Multi-scale Modeling and Simulation Method of Urban Rail Traction Power Supply System for Digital Twin

Analysis of Rail Potential and Stray Current with an Unified Chain Model of Dual Traction Power Supply System

Multi-Port and -Functional Power Conditioner and Its Control Strategy with Renewable Energy Access for a Railway Traction System

A Novel Power Electronic Autotransformer-Based Bipolar MVDC Electrified Railway System

Research of Direct Torque Control on Traction Drive System of CRH3 EMU