Abstract:The paper presents results of a study of forced convection in a vertical flat and circular microchannels incorporating porous medium under slip boundary conditions of the first and second orders. The problem was solved analytically and compared with numerical simulations based on the lattice Boltzmann method. Effects of porosity and slip velocity on velocity and temperature profiles were investigated. Behavior of the normalized Nusselt number as a function of the Knudsen and Prandtl numbers, as well as the parameter M characterizing porosity of the medium in the microchannel, was also elucidated. Computations indicated that a decrease in porosity (an increase in the parameter M) causes a decrease in the velocity and temperature jumps on the wall, which contributes to the increase in the Nusselt number. Considering the effect of the second-order slip boundary conditions leads to the decrease in the velocity jump on the wall, when the coefficient A2 (this coefficient considers the second-order slip boundary conditions) changes from negative to positive values. The heat transfer rate at high Prandtl numbers increases with the increasing Knudsen number, because of the improved thermal interaction of the flow with the channel wall. Given the second-order boundary conditions, the effect of parameter A2 was not observed at small Prandtl numbers (Pr ≤ 1). For A2 < 0, the second-order boundary conditions cause an increase in the normalized Nusselt number, whereas for A2 > 0 the normalized Nusselt number decreases in comparison with the case of A2 = 0 (the first-order boundary conditions). The results by the analytical solution and the lattice Boltzmann method are in a good agreement with each other for A2 ≥ 0, with the differences ≤ 1%. For A2 < 0, the differences between two models are more noticeable. For A2 ≥ 0, predictions by the analytical model lie higher than the numerical results, whereas for A2 < 0, numerical simulations exceed the analytical solution.

Start-up slip flow in a microchannel with a rectangular cross section

Simulation of Couette Flow Using Conventional Burnett Equations with Modified Slip Boundary Conditions

Start-up flow in shallow deformable microchannels

Lattice-Boltzmann Method for Gas Flow in Microchannels

Numerical Computations of the Flow in A Finite Diverging Channel

Transitional pressure drop in a cavitied microchannel

Simplified models for unsteady three-dimensional flows in slowly varying microchannels

Comparison of Numerical Schemes for the Problem of Laminar Flow in a Suddenly Expanding Channel

Diffusioosmotic flow in rectangular microchannels

Experimental Investigation of Adiabatic Gas-Liquid Flow Regimes and Pressure Drop in Slit Microchannel

Numerical investigation on slip-flow and heat transfer characteristics in the entrance region of elliptical microchannels

On the Enhancement of Heat Transfer and Reduction of Entropy Generation by Asymmetric Slip in Pressure-Driven Non-Newtonian Microflows

Viscoelastic flow with slip in a hyperbolic channel

COMPUTATION OF THREE-DIMENSIONAL DEVELOPING PRESSURE-DRIVEN LIQUID FLOW IN A MICROCHANNEL WITH EDL EFFECT

Heat Transfer in Porous Microchannels with Second-Order Slipping Boundary Conditions

1-D Modelling and 3-D Simulation of Confined Bubble Formation and Pressure Fluctuations During Flow Boiling in a Microchannel with a Rectangular Cross-Section of High Aspect Ratio

Laminar forced convection characteristics in a round microchannel with shape uncertainty: effect of wall slip

Numerical Assessment of the Thermal Performance of Microchannels with Slip and Viscous Dissipation Effects

Start-Up Electroosmotic Flow of Multi-Layer Immiscible Maxwell Fluids in a Slit Microchannel

Numerical study on thermal transpiration flows through a rectangular channel

Numerical simulation of fluid flow and heat transfer in microchannels with patterns of hydrophobic/hydrophilic walls