Analysis of Two Approaches for an Adiabatic Boundary Condition in Porous Media
Kun Yang,Xingwang You,Jiabing Wang,Kambiz Vafai
DOI: https://doi.org/10.1108/hff-09-2015-0363
2016-01-01
International Journal of Numerical Methods for Heat & Fluid Flow
Abstract:Purpose – The purpose of this paper is to analyze two different approaches (Models A and B) for an adiabatic boundary condition at the wall of a channel filled with a porous medium. The analytical solutions for the velocity distribution, the fluid and solid phase temperature distributions are derived and compared with numerical solutions. The phenomenon of heat flux bifurcation for Model A is demonstrated. The effects of pertinent parameter C on the applicability of the Models A and B are discussed. Analytical solutions for the overall Nusselt number and the heat flux distribution at the channel wall are derived and the influence of pertinent parameters Da and k on the overall Nusselt number and the heat flux distribution is discussed. Design/methodology/approach – Two approaches (Models A and B) for an adiabatic boundary condition in porous media under local thermal non-equilibrium (LTNE) conditions are analyzed in this work. The analysis is applied to a microchannel which is modeled as a porous medium. Findings – The phenomenon of heat flux bifurcation at the wall for Model A is demonstrated. The effect of pertinent parameter C on the applicability of each model is discussed. Model A is applicable when C is relatively large and Model B is applicable when C is small. The heat flux distribution is obtained and the influence of Da and k is discussed. For Model A, ϕAfin increases and ϕAsub, ϕAcover decrease as Da decreases and k is held constant, ϕAsub increases and ϕAfin, ϕAcover decrease as k increases while Da is held constant; for Model B, ϕBfin increases and ϕBsub decreases either as Da decreases or k decreases. The overall Nusselt number is also obtained and the effect of Da and k is discussed: Nu increases as either Da or k decrease for both models. The overall Nusselt number for Model A is larger than that for Model B when Da is large, the overall Nusselt numbers for Models A and B are equivalent when Da is small. Research limitations/implications – Proper representation of the energy equation and the boundary conditions for heat transfer in porous media is very important. There are two different models for representing energy transfer in porous media: local thermal equilibrium (LTE) and LTNE. Although LTE model is more convenient to use, the LTE assumption is not valid when a substantial temperature difference exists between the solid and fluid phases. Practical implications – Fluid flow and convective heat transfer in porous media have many important applications such as thermal energy storage, nuclear waste repository, electronic cooling, geothermal energy extraction, petroleum processing and heat transfer enhancement. Social implications – This work has important fundamental implications. Originality/value – In this work the microchannel is modeled as an equivalent porous medium. The analytical solutions for the velocity distribution, the fluid and solid phase temperature distributions are obtained and compared with numerical solutions. The first type of heat flux bifurcation phenomenon, which indicates that the direction of the temperature gradient for the fluid and solid phases is different at the channel wall, occurs when Model A is utilized. The effect of pertinent parameter C on the applicability of the models is also discussed. The analytical solutions for the overall Nusselt number and the heat flux distribution at the channel wall are derived, and the effects of pertinent parameters Da and k on the overall Nusselt number and the heat flux distribution are discussed.