Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

COMPUTATION OF THREE-DIMENSIONAL DEVELOPING PRESSURE-DRIVEN LIQUID FLOW IN A MICROCHANNEL WITH EDL EFFECT

Computational studies of the EDL effect in 3-D developing flow in microchannel

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Relationship Between Dimension and Diffusion in Pressure Driven Micro-Channel Flows

1-D Modelling and 3-D Simulation of Confined Bubble Formation and Pressure Fluctuations During Flow Boiling in a Microchannel with a Rectangular Cross-Section of High Aspect Ratio

Study on characteristics of liquid flow through a rectangular microchannel with electrokinetic effects

Numerical Investigation of EDL Effects on the Flow Characters of Polar Fluids in Rectangular Microchannels

Study on Friction Coefficient of Liquid Flow through a Rectangular Microchannel with Electrokinetic Effects

3D Numerical Investigation on Flow Boiling Characteristics in Large Length-to-diameter Ratio Microchannel

Joule Heating, Viscous Dissipation and Convective Heat Transfer of Pressure-Driven Flow in A Microchannel with Surface Charge-Dependent Slip

Three-dimensional analysis of heat transfer in a micro-heat sink with single phase flow

Simplified Model and Lattice Boltzmann Algorithm for Microscale Electro-Osmotic Flows and Heat Transfer

Steady Electroosmotic Flow in Diverging Microchannels

Thermal Effects on Electro-Osmotic Pumping of Liquids in Microchannels

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

Nanofluid Flow and Heat Transfer in a Microchannel with Interfacial Electrokinetic Effects

Combined effect of surface charge and boundary slip on pressure-driven flow and convective heat transfer in nanochannels with overlapping electric double layer

Numerical Simulation on Electroosmotic Flow in a Rectangular Microchannel

Mesoscopic Simulations of Electroosmotic Flow and Heat Transfer Between Two Parallel Plates Microchannel With the Presence of Differential Pressure

A modeling approach for capillary-driven flow of a wetting fluid in a rectangular open microchannel of arbitrary axisymmetric width profile: Application to heat pipes

Pressure-Driven Nitrogen Flow in Divergent Microchannels with Isothermal Walls