Abstract:Two-dimensional (2D) nanosheets have attracted significant attention in photovoltaic devices in recent years owing to their outstanding photoelectric properties. Herein, 2D α-In2Se3 nanosheets with high conductivity and suitable work function are synthesized by liquid-phase exfoliation method. To ameliorate the low conductivity of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) (2.21 × 10-3 S cm-1), α-In2Se3 nanosheets are directly added into PEDOT:PSS to obtain the PEDOT:PSS:α-In2Se3 composite film. The composite film exhibits excellent optical transmittance, suitable work function, and enhanced conductivity (1.54 × 10-2 S cm-1). To profoundly investigate the mechanism of conductivity improvement, X-ray photoelectron spectroscopy, Raman spectroscopy, electron paramagnetic resonance, and atomic force microscopy are conducted. The results show that the synergistic effect of 2D α-In2Se3 nanosheets and isopropyl alcohol/deionized water cosolvent screens the Coulombic attraction among PEDOT and PSS. The screening effect results in the partial removal of PSS and the benzoid-quinoid transition of PEDOT. In addition, α-In2Se3 nanosheets may serve as physical linkers for PEDOT chains. Both these effects are beneficial to increase the interfacial contact area between PEDOT chains and form a larger conductive network of PEDOT, leading to an enhanced conductivity. The composite film is first employed as a hole transport layer (HTL) in polymer solar cells (PSCs). The power conversion efficiency (PCE) of the poly[2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione)] (PBDB-T):3,9-bis(2-methylene(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)dithieno-[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC)-based device with composite HTL is 10% higher than that of the unmodified PBDB-T:ITIC-based device, and the maximum PCE of 15.89% is achieved in the (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)-4-fluorothiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene))-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)-benzo[1,2-c:4,5-c']dithiophene-4,8-dione))] (PM6):(2,2'-((2Z,2Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2,″3″:4',50]thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile) (Y6) system. More interestingly, the stability of devices with composite HTL is improved owing to the partial removal of PSS. Thus, the PEDOT:PSS:α-In2Se3 composite can be a potential HTL material in PSCs.

Tuning hole charge collection efficiency in polymer photovoltaics by optimizing the work function of indium tin oxide electrodes with solution-processed LiF nanoparticles

Enhanced efficiency of polymer: Fullerene bulk heterojunction solar cells with the insertion of thin TiO2 layer near the LiF/Al electrode

Enhanced Efficiency Of Polymer: Fullerene Bulk Heterojunction Solar Cells With The Insertion Of Thin Tio2

In situ polymerization of ethylenedioxythiophene from sulfonated carbon nanotube templates: toward high efficiency ITO-free solar cells

Solution-Processable PEDOT:PSS:α-In2Se3 with Enhanced Conductivity as a Hole Transport Layer for High-Performance Polymer Solar Cells

Efficient Polymer Solar Cells by Lithium Sulfonated Polystyrene As a Charge Transport Interfacial Layer

Importance of interface engineering between the hole transport layer and the indium-tin-oxide electrode for highly efficient polymer solar cells

Enhancing the Performance of Planar Heterojunction Perovskite Solar Cells Using Stable Semiquinone and Amine Radical Modified Hole Transport Layer

Enhanced Organic Solar Cells Efficiency through Additive Electronic and Electro-optic Effects Resulting from Doping a Polymer Hole Transport Layer

A simple doping strategy to improve PEDOT:PSS charge extraction capability in polymer solar cells

Improved efficiency of polymer solar cells using alcohol-soluble self-doped N-type polymers as cathode interface layer

Efficient Organic-Inorganic Hybrid Cathode Interfacial Layer Enabled by Polymeric Dopant and Its Application in Large-Area Polymer Solar Cells

p-Doping of a Hole Transport Material via a Poly(ionic liquid) for over 20% Efficiency and Hysteresis-Free Perovskite Solar Cells

Improved Hole Transfer and Charge Generation in All-Polymer Photovoltaic Blends with a P–i–N Structure

Doping ZnO with Water/Alcohol-Soluble Small Molecules As Electron Transport Layers for Inverted Polymer Solar Cells.

Conductivity Enhancement of PEDOT:PSS Film Via Sulfonic Acid Modification: Application As Transparent Electrode for ITO-free Polymer Solar Cells

A New Alcohol‐Soluble Polymer PFN‐ID as Cathode Interlayer to Optimize Performance of Conventional Polymer Solar Cells by Increasing Electron Mobility

Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes

Dual Optimization of Bulk and Interface Via the Synergistic Effect of Ligand Anchoring and Hole Transport Dopant Enables 23.28% Efficiency Inverted Perovskite Solar Cells

Improved Charge Generation via Ultrafast Effective Hole‐Transfer in All‐Polymer Photovoltaic Blends with Large Highest Occupied Molecular Orbital (HOMO) Energy Offset and Proper Crystal Orientation

Tuning the Phase Separation of PEDOT:PSS Affords Efficient Lead-Free Perovskite Solar Cells