Abstract:Rice and wheat husks were converted to biochars by slow pyrolysis (1 h) at 600 °C. Iron oxide rice husk hybrid biochar (RHIOB) and wheat husk hybrid biochar (WHIOB) were synthesized by copyrolysis of FeCl3-impregnated rice or wheat husks at 600 °C. These hybrid sorbents were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), SEM-energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, physical parameter measurement system, and Brunauer-Emmett-Teller (BET) surface area techniques. Fe3O4 was the predominant iron oxide present with some Fe2O3. RHIOB and WHIOB rapidly chemisorbed As(III) from water (∼24% removal in first half an hour reaching up to ∼100% removal in 24 h) at surface Fe-OH functions forming monodentate ≡Fe-OAs(OH)2 and bidentate (≡Fe-O)2AsOH complexes. Optimum removal occurred in the pH 7.5-8.5 range for both RHIOB and WHIOB, but excellent removal occurred from pH 3 to 10. Batch kinetic studies at various initial adsorbate-adsorbent concentrations, temperatures, and contact times gave excellent pseudo-second-order model fits. Equilibrium data were fitted to different sorption isotherm models. Fits to isotherm models (based on R 2 and χ2) on RHIOB and WHIOB followed the order: Redlich-Peterson > Toth > Sips = Koble-Corrigan > Langmuir > Freundlich = Radke-Prausnitz > Temkin and Sips = Koble-Corrigan > Toth > Redlich-Peterson > Langmuir > Temkin > Freundlich = Radke-Prausnitz, respectively. Maximum adsorption capacities, Q RHIOB 0 = 96 μg/g and Q WHIOB 0 = 111 μg/g, were obtained. No As(III) oxidation to As(V) was detected. Arsenic adsorption was endothermic. Particle diffusion was a rate-determining step at low (≤50 μg/L) concentrations, but film diffusion controls the rate at ≥100-200 μg/L. Binding interactions with RHIOB and WHIOB were established, and the mechanism was carefully discussed. RHIOB and WHIOB can successfully be used for As(III) removal in single and multicomponent systems with no significant decrease in adsorption capacity in the presence of interfering ions mainly Cl-, HCO3 -, NO3 -, SO4 2-, PO4 3-, K+, Na+, Ca2+. Simultaneous As(III) desorption and regeneration of RHIOB and WHIOB was successfully achieved. A very nominal decrease in As(III) removal capacity in four consecutive cycles demonstrates the reusability of RHIOB and WHIOB. Furthermore, these sustainable composites had good sorption efficiencies and may be removed magnetically to avoid slow filtration.

Simultaneous removal of As(III) and As(V) from wastewater by co-precipitation using an experimental design approach

Arsenic Removal in Synthetic Ground Water Using Iron Electrolysis

Optimization of Coagulation-Flocculation Process in Efficient Arsenic Removal from Highly Contaminated Groundwater by Response Surface Methodology

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide

COMPARISON OF ARSENIC REMOVAL FROM CONTAMINATED GROUNDWATER BY COAGULATION-SAND FILTRATION AND LOCCULATION/MICROFILTRATION REACTOR

Removal of Arsenic Oxyanions from Water by Ferric Chloride—Optimization of Process Conditions and Implications for Improving Coagulation Performance

Aqueous arsenic(V) remediation and redox transformation of arsenic(III) to arsenic(V) using Fe 3 O 4 /Douglas fir biochar

A Combined CFD-Response Surface Methodology Approach for Simulation and Optimization of Arsenic Removal in a Fixed Bed Adsorption Column

Simultaneous Removal of As(iii) and As(v) from Aqueous Solution by Using Iron-Functionalized Polythiophene: A Novel Approach toward Water Treatment

Simultaneous Removal of Arsenite and Fluoride Via an Integrated Electro-Oxidation and Electrocoagulation Process.

Response surface methodology based on central composite design as a chemometric tool for optimization of dispersive-solidification liquid-liquid microextraction for speciation of inorganic arsenic in environmental water samples

High-efficiency removal of As(III) from groundwater using siderite as the iron source in the electrocoagulation process

Removal of As(V) and As(III) from Water with a PEI-modified Fungal Biomass

Integrated bio-oxidation and adsorptive filtration reactor for removal of arsenic from wastewater

Sustainable Low-Concentration Arsenite [As(III)] Removal in Single and Multicomponent Systems Using Hybrid Iron Oxide-Biochar Nanocomposite Adsorbents-A Mechanistic Study

Application of the liquid-liquid extraction method and subsequent icp-ms detection for speciation analysis of arsenic in wastewater samples

Fesx@Mof-808 Composite for Efficient As(Iii) Removal from Wastewater: Behavior and Mechanism

Simultaneous Elimination and Detoxification of Arsenite in the Presence of Micromolar Hydrogen Peroxide and Ferrous and Its Environmental Implications.

Removal of Arsenite by Simultaneous Electro-Oxidation and Electro-Coagulation Process

Efficient removal of As(III) via simultaneous oxidation and adsorption by magnetic sulfur-doped Fe-Cu-Y trimetal oxide nanoparticles

Using an anti-fouling electro- (stainless-steel/ PVC) membrane reactor in electrocoagulation process for arsenic removal: Experimental study and mechanism development in multiphase media using CFD