Abstract:The potential of porous diatom silica shells as a naturally abundant low-cost sorbent for the removal of arsenic in aqueous solutions was investigated in a batch study. The objective of this work was to chemically modify the silica shells of a diatom Melosira sp. with bifunctional (thiol and amino) groups to effectively remove arsenic in its toxic As(III) form (arsenite) predominant in the aquatic environment. Sorption experiments with this novel sorbent were conducted under varying conditions of pH, time, dosage, and As(III) concentration. A maximum adsorption capacity of 10.99 mg g-1 was achieved within 26 h for a solution containing 12 mg L-1 As(III) at pH 4 and sorbent dosage of 2 g L-1. The functionalized diatom silica shells had a surface morphological change which was accompanied by increased pore size at the expense of reduced specific surface area and total pore volume. As(III) adsorption was best fitted with the Langmuir-Freundlich model, and the adsorption kinetic data using pore surface diffusion model showed that both the external (film) and internal (intraparticle) diffusion can be rate-determining for As(III) adsorption. Fourier transform infrared spectroscopy (FTIR) indicated that the thiol and amino groups potentially responsible for As(III) adsorption were grafted on the surface of diatom silica shells. X-ray photoelectron spectroscopy (XPS) further verified that this unique sorbent proceeded via a chemisorption mechanism through the exchange between oxygen-containing groups of neutral As(III) and thiol groups, and through the surface complexation between As(III) and protonated nitrogen and hydroxyl groups. Results indicate that this functionalized bioadsorbent with a high As(III) adsorption capacity holds promise for the treatment of As(III) containing wastewater.

Removal of As(V) and As(III) from Water with a PEI-modified Fungal Biomass

Enhanced Adsorption of Trivalent Arsenic from Water by Functionalized Diatom Silica Shells.

Polyethylenimine-Modified Fungal Biomass As A High-Capacity Biosorbent For Cr(Vi) Anions: Sorption Capacity And Uptake Mechisms

Enhanced removal of pentachlorophenol and 2,4-D from aqueous solution by an aminated biosorbent.

As(V) Sorption from Aqueous Solutions Using Quaternized Algal/polyethyleneimine Composite Beads

Surface-modified Phanerochaete Chrysosporium As a Biosorbent for Cr(VI)-contaminated Wastewater

Removal of As(V) from wastewater by chemically modified biomass

Characterization of PEI-modified Biomass and Biosorption of Cu(II), Pb(II) and Ni(II)

Removal of Humic Acid Using PEI‐Modified Fungal Biomass

Polyethyleneimine stabilized nanoscale zero-valent iron-magnetite (Fe3O4@nZVI-PEI) for the enhanced removal of arsenic from acidic aqueous solution: Performance and mechanisms

Rapid And Effective Preparation Of A Hpei Modified Biosorbent Based On Cellulose Fiber With A Microwave Irradiation Method For Enhanced Arsenic Removal In Water

Chromate sorption and reduction kinetics onto an aminated biosorbent.

Surface modification of Penicillium chrysogenum mycelium for enhanced anionic dye removal

Optimization of the preparation of fungal-algal pellets for use in the remediation of arsenic-contaminated water

[Preparation of a Novel Aminated Fungal Biomass and Its Sorption for Typical Endocrine Disruptors].

Removal of As(V) Based on Amino-Group Surface-Functionalized Porous Silicon Derived from Photovoltaic Silicon Cutting Powder

Polyethyleneimine-modified iron-doped birnessite as a highly stable adsorbent for efficient arsenic removal

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide

Long-root Eichhornia Crassipes As a Biodegradable Adsorbent for Aqueous As(III) and As(V)

As(V) Removal from Water Using a Novel Magnetic Particle Adsorbent Prepared with Iron-Containing Water Treatment Residuals

Arsenic removal using a biopolymer chitosan sorbent.