Abstract:The potential of porous diatom silica shells as a naturally abundant low-cost sorbent for the removal of arsenic in aqueous solutions was investigated in a batch study. The objective of this work was to chemically modify the silica shells of a diatom Melosira sp. with bifunctional (thiol and amino) groups to effectively remove arsenic in its toxic As(III) form (arsenite) predominant in the aquatic environment. Sorption experiments with this novel sorbent were conducted under varying conditions of pH, time, dosage, and As(III) concentration. A maximum adsorption capacity of 10.99 mg g-1 was achieved within 26 h for a solution containing 12 mg L-1 As(III) at pH 4 and sorbent dosage of 2 g L-1. The functionalized diatom silica shells had a surface morphological change which was accompanied by increased pore size at the expense of reduced specific surface area and total pore volume. As(III) adsorption was best fitted with the Langmuir-Freundlich model, and the adsorption kinetic data using pore surface diffusion model showed that both the external (film) and internal (intraparticle) diffusion can be rate-determining for As(III) adsorption. Fourier transform infrared spectroscopy (FTIR) indicated that the thiol and amino groups potentially responsible for As(III) adsorption were grafted on the surface of diatom silica shells. X-ray photoelectron spectroscopy (XPS) further verified that this unique sorbent proceeded via a chemisorption mechanism through the exchange between oxygen-containing groups of neutral As(III) and thiol groups, and through the surface complexation between As(III) and protonated nitrogen and hydroxyl groups. Results indicate that this functionalized bioadsorbent with a high As(III) adsorption capacity holds promise for the treatment of As(III) containing wastewater.

Removal of As(V) Based on Amino-Group Surface-Functionalized Porous Silicon Derived from Photovoltaic Silicon Cutting Powder

Enhanced Adsorption of Trivalent Arsenic from Water by Functionalized Diatom Silica Shells.

Removal of arsenic(V) from aqueous solutions using 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane functionalized silica gel adsorbent

Fe<SUP>3+</SUP> coordinated to amino-functionalized spherical mesoporous silica: Preparation, characterization, and application as a rapid and efficient adsorbent for As(V) removal

Efficient Removal of Arsenate by A Surface Functionalized Chelating Fiber Based on Polyacrylonitrile

Effective removal of Cr(VI) from aqueous solution based on APTES modified nanoporous silicon prepared from kerf loss silicon waste

As(V) Removal from Water Using a Novel Magnetic Particle Adsorbent Prepared with Iron-Containing Water Treatment Residuals

Removal of Trace As(V) from Water with the Titanium Dioxide/ACF Composite Electrode

Phosphoramidic acid functionalized silica microspheres for simultaneous removal of Cr(VI), As(V) and Se(VI) from aqueous solutions based on molecular geometry match

Removal Technology and Mechanism of Arsenic From Wastewater by Zeolite Imidazole Framework-8@Carbon Nanodots

Deep Purification of As(V) in Drinking Water by Silica Gel Loaded with FeOOH and MnO2

Highly Efficient and Facile Removal of As (V) from Water by Using Pb‐MOF with higher stable and fluorescence

As(V) and As(III) Removal from Water by a Ce–Ti Oxide Adsorbent: Behavior and Mechanism

Effective Removal of Cd(II) from Aqueous Solution Based on Multifunctional Nanoporous Silicon Derived from Solar Kerf Loss Waste

As(Ⅲ)removal from low-arsenic concentration drinking water by adsorption with nanoparticle amorphous titanium dioxide

Removal of As(V) and As(III) from Water with a PEI-modified Fungal Biomass

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide

Activated Red Mud Loaded Porcelain Sand for the Adsorption of As(V) from Aqueous System

Asenic removal from groundwater using granular chitosan-titanium adsorbent

Preparation, Characterization and Application of a Ce–Ti Oxide Adsorbent for Enhanced Removal of Arsenate from Water

Removal of arsenic(v) from aqueous solutions using sulfur-doped Fe3O4 nanoparticles.