Abstract:Cryogenic liquid nitrogen (LN2) is proposed as an effective fire suppressant/extinguisher for challenging fires. Upon reaching a fire source, this inert cryogen vaporizes expediently and separates the fuel from the air. Additionally, it cools the burning fuel and slows down its pyrolysis/gasification reactions. A prior investigation concentrated on the survivability of single LN2 droplets, following breakup of the jet exiting the nozzle, and the predicted the droplet size that reaches a target. This investigation addresses the application of a liquid nitrogen jet for the extinction of fires with a combination of experiments and theoretical analysis. Small scale laboratory experiments were conducted with a sprayer and larger scale experiments were conducted with a cryogenic hose and nozzle. In these experiments the reach of the liquid nitrogen jets was measured, and their fire extinction capabilities were assessed. Numerical simulations were performed with the ADREA-HF CFD code using the mixture approach and explicit modelling of LN2 evaporation using the Lee model. Numerical results on the reach of a liquid nitrogen jet qualitatively matched the experimental observations for release of a liquid nitrogen jet in open atmosphere. The Lee model coefficient was found to depend strongly on the nozzle diameter. An integral model was also constructed to explore the effects of relevant parameters, such as the LN2 storage tank pressure, the initial jet vapor quality, the jet velocity at the nozzle exit and the effects of the ambient air entrainment. Based on experiments and theoretical analysis, it became evident that for effective extinction of a fire with liquid nitrogen a commercial nozzle should have a large diameter and should be brought close to the burning target, i.e., within a few meters. As this action can pose potential safety risks to firefighters, the advancement of the nozzle towards the fire should be operated remotely.

Quantification of radiative attenuation provided by fire hose nozzles

EMULATIONAL AND EXPERIMENTAL STUDY OF NEW WATER MIST SPRAY NOZZLE FOR FIRE SUPPRESSION

Simultaneous high-speed internal and external flow measurements for a high-pressure diesel nozzle

Two-stage atomizing high pressure water mist spray head for fire suppression

Measurement of Atomization Characteristics on Water Mist Fire Suppression Nozzle

Impact of Airflow Rate on Fire Suppression via Water Mist in a Mechanically Ventilated Compartment

Experimental and numerical study on attenuation of thermal radiation from large-scale pool fires by water mist curtain

A Model for Predicting the Trajectory and Structure of Firefighting Hose Streams

EXPERIMENTAL RESEARCH OF GEOMETRIC PARAMETERS CHANGE OF THE OF FIRE HOSES WHEN USING THE PROTEK 366 NOZZLE

The flame mitigation effect of N2 and CO2 on the hydrogen jet fire

Effectiveness of Swirl Water Mist Nozzles for Fire Suppression

Experiments and Modelling of Liquid Nitrogen Jet Release and Dispersion for Fire-Related Applications

Organic contaminants formed during fire extinguishing using different firefighting methods assessed by nontarget analysis

RADIATION-AUGMENTED RIGID POLYURETHANE FOAM FIRE SUPPRESSION USING A WATER SPRAY

Improving the fire-extinguishing effect of pneumatic extinguishers with airflow-spray synergistic jet: Investigation of nozzle position and number of nozzles

Experimental Investigation of Water-Based Fire Suppression Systems on External Façade Fires

Estimating the Longitudinal Maximum Gas Temperature Attenuation of Ceiling Jet Flows Generated by Strong Fire Plumes in an Urban Utility Tunnel

Characterization of an effervescent atomization water mist nozzle and its fire suppression tests

Practical approaches for evaluating radiative heat from high pressure hydrogen flame

Experimental Study on the Interaction of Fine Water Spray with Liquid Pool Fires

On the Fire Hose Kickback Force in Solid Water Streams