Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

Microstructure and Mechanical Properties of Al6061-31vol.% B4C Composites Prepared by Hot Isostatic Pressing

Microstructure and properties of a HIP manufactured SiC p reinforced high alloyed Al–Zn–Mg–Cu–Zr–Ti aluminum matrix composite

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Study on the enhancement mechanism of (TiC + B 4 C)/6061Al composite fabricated via vacuum hot-press sintering

Microstructure and Mechanical Properties of Al–B 4 C Composite at Elevated Temperature Strengthened with in Situ Al 2 O 3 Network

Microstructure and mechanical properties of TiB2–B4C ceramics fabricated by hot-pressing

High-performance B4C matrix composites fabricated from the B4C–Si–CeO2 system via reactive hot pressing

Fabrication and characterization of stir casting AA6061-31% B4C composite

Microstructure and properties of hot pressed TiB2 and SiC reinforced B4C–based composites

Effect of Sintering Temperature and Hot Cross-Rolling Process on Physical, Mechanical and Microstructural Properties of Al/B4C Composite Made by the Hot Pressing Process

Thermally Stable Microstructures and Mechanical Properties of B4C-Al Composite with In-Situ Formed Mg(Al)B2

Microstructure and properties of TiCp/30CrNi4Mo steel-based composites prepared by hot isostatic press

Microstructure and mechanical properties of B4C matrix composites prepared via hot-pressing sintering with Pr6O11 as additive

Research on Microstructure and Mechanical Properties of B<sub>4</sub>C/Al Composites by Liquid Mental Mixing

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

Hot isostatic pressing of SiC particulate reinforced metal matrix composites

High Temperature Mechanical Properties and Wear Performance of B4C/Al7075 Metal Matrix Composites

Influence of particulate B4C size on microstructural evolution and mechanical behavior in nanostructured Al matrix during heat treatment

The effect of B and Ti–Al intermetallics additions on the microstructure and mechanical properties of hot-pressed B4C