Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

Design and optimization of a catalytic membrane reactor for the direct synthesis of propylene oxide

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Epoxidation of propylene to propylene oxide catalyzed by large-grain TS-1 in supercritical CO2

Tunable Synthesis of Propylene Glycol Ether from Methanol and Propylene Oxide under Ambient Pressure

Catalytic Conversion of Biomass-Derived 1,2-Propanediol to Propylene Oxide over Supported Solid-Base Catalysts

Direct propylene epoxidation with molecular oxygen over titanosilicate zeolites

Aliphatic Olefin Epoxidation with Hydrogen Peroxide Catalyzed by an Integrated Mn/TS-1/N System

Overcoming limitations in propanedehydrogenation by codesigning catalyst-membrane systems

Catalytic Membrane Reactors for Partial Oxidation Using Perovskite Hollow Fiber Membranes and for Partial Hydrogenation Using a Catalytic Membrane Contactor

Highly efficient and stable hydrogen permeable membrane reactor for propane dehydrogenation

Scalable Thin-Layer Membrane Reactor for Heterogeneous and Homogeneous Catalytic Gas–liquid Reactions

Direct synthesis of propylene glycol methyl ether from propylene using Al-TS-1 catalyst: Ti-Al synergy

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether

Highly Efficient Epoxidation of Propylene with In Situ -Generated H 2 O 2 over a Hierarchical TS-1 Zeolite-Supported Non-Noble Nickel Catalyst

Tandem photocatalytic production of H 2 O 2 and propylene oxide on 5-Bromoisatin modified carbon nitride

Synthesis of the novel catalytic membrane of KOH/ Fe 3 O 4 -graphene oxide/PVDF for the production of biodiesel in a membrane reactor: Optimization with response surface methodology (RSM)

Propylene Production via Oxidative Dehydrogenation of Propane with Carbon Dioxide over Composite MxOy-TiO2 Catalysts

Nanoconfinement Ionic Liquid Membranes for Efficient Flow Catalytic CO 2 Cycloaddition

Syngas Production via Oxidative Reforming of Propane Using a CO2- and O2-Permeating Membrane

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2

Rational design of structured Co3O4@silicalite-1/SiC foam catalyst for microwave-assisted highly efficient conversion of bio-isopropanol to green propylene