Abstract:The research is focused on the design and development of woven textile-based structural hollow composites. E-Glass and high tenacity polyester multifilament yarns were used to produce various woven constructions. Yarn produced from cotton shoddy (fibers extracted from waste textiles) was used to develop hybrid preforms. In this study, unidirectional (UD), two-dimensional (2D), and three-dimensional (3D) fabric preforms were designed and developed. Further, 3D woven spacer fabric preforms with single-layer woven cross-links having four different geometrical shapes were produced. The performance of the woven cross-linked spacer structure was compared with the sandwich structure connected with the core pile yarns (SPY). Furthermore, three different types of cotton shoddy yarn-based fabric structures were developed. The first is unidirectional (UD), the second is 2D all-waste cotton fabric, and the third is a 2D hybrid fabric with waste cotton yarn in the warp and glass multifilament yarn in the weft. The UD, 2D, and 3D woven fabric-reinforced composites were produced using the vacuum-assisted resin infusion technique. The spacer woven structures were converted to composites by inserting wooden blocks with an appropriate size and wrapped with a Teflon sheet into the hollow space before resin application. A vacuum-assisted resin infusion technique was used to produce spacer woven composites. While changing the reinforcement from chopped fibers to 3D fabric, its modulus and ductility increase substantially. It was established that the number of crossover points in the weave structures offered excellent association with the impact energy absorption and formability behavior, which are important for many applications including automobiles, wind energy, marine and aerospace. Mechanical characterization of honeycomb composites with different cell sizes, opening angles and wall lengths revealed that the specific compression energy is higher for regular honeycomb structures with smaller cell sizes and a higher number of layers, keeping constant thickness.

Development and characterization of three-dimensional woven-shaped preforms and their associated composites

Design, Development, and Characterization of Advanced Textile Structural Hollow Composites

Evolution of 3D weaving and 3D woven fabric structures

Effect of hybrid weaving patterns on mechanical performance of 3D woven structures

Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material

Mechanical performance of composites based on various three-dimensional woven-fibre preforms

Evaluation of the mechanical behaviour of tufted preforms

Multiaxis three-dimensional weaving for composites: A review

A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites

Integrated Design For Manufacturing of Braided Preforms For Advanced Composites Part II: 3D Braiding

Structural mechanics of 3-D braided preforms for composites. IV - The 4-step tubular braiding

Effect of stable-structural 3D woven preform on tensile and flexural properties of carbon fiber/epoxy composites

Multifunctional auxetic and honeycomb composites made of 3D woven carbon fibre preforms

Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

Compaction behavior of 3D woven preforms with hybrid fibers and under different process parameters

Experimental characterization and numerical analysis of 3D woven preforms torsional deformation

Mechanical Testing of 3D Fabric Composites and Their Matrix Material SC-15

Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs

Large deformation of variable thickness woven composite preforms considering interlayer difference. Application: Forming simulation of a blade preform

A review of the formability of woven fabrics for composite materials

3D woven auxetic composites using onloom shaped reinforcement