Abstract:A complementary electrolyte system with 0.8 M lithium bis(fluorosulfonylimide) (LiFSI) salt and 2 wt % lithium perchlorate (LiClO4) additive in fluoroethylene carbonate (FEC)/ethyl methyl carbonate (EMC) solution enables not only stable cycling of lithium metal batteries (LMBs) with practical loading (<30 μm lithium anode, cathode loading > 4 mAh/cm2) but also outstanding degradation stability toward the end of cycle life when compared to the conventional electrolyte. Although the use of LiFSI salt can increase the electrolyte conductivity and lengthen the cycle life of LMBs, the aged lithium anode morphology formed by the sacrificial decomposition of LiFSI is highly porous, leading to an abrupt cell capacity drop toward the end of cycling. Moreover, the inability to stop aluminum corrosion by the LiFSI-based electrolyte also causes cracking of the cathode tab during prolonged cycling. It is observed that a highly porous aged lithium consumed electrolyte at a higher rate, leading to the dry-out of electrolyte solvents. On the contrary, dense aged lithium anode morphology increased the localized current applied on the lithium, causing the formation of lithium dendrite. Thus, porosity control is the key to enhance battery performance. In this complementary system, LiClO4 was introduced as an advanced additive to not only improve the capacity retention rate but also mitigate the abrupt capacity drop toward the end of cycle life because LiClO4 acted as a pore astringent reducing the porosity of the aged lithium metal anode to the desired level. Moreover, the addition of LiClO4 can also suppress the Al corrosion, allowing stable high-voltage cycling of LMBs. The synergistic effect of combining LiFSI salt and a LiClO4 additive leads to an electrolyte system that can facilitate the application of high-energy LMBs with practical electrode loading.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03017?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03017</a>.Brief statement in a nonsentence format listing the contents of the material; chemical structures and acronyms of carbonates, fluorinated carbonates, and lithium salts; pristine NMC622 cathode; backside (Al current collector) of the harvested electrode aged in the LiFSI/FEC/EMC electrolyte; Capacity retention and electrochemical impedance spectra of Li/NMC622 cells with different electrolytes; XPS spectra of C 1s, F 1s, S 2p, and Cl 2p for the pristine and harvested lithium anodes after formation under different electrolytes; Tafel plots obtained from the CV test in the Li/Cu cell with various FEC/EMC electrolytes; and SEM image of the Al working electrode before and after potentiostatic hold under different electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03017/suppl_file/am1c03017_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancing Cycle Stability of Lithium Iron Phosphate in Aqueous Electrolytes by Increasing Electrolyte Molarity

Enhanced Stability at the Electrode-Electrolyte Interface in Ionic Liquid Electrolyte for 5 V Lithium-Ion Rechargeable Batteries

Enhancing the Cycling Stability for Lithium-Metal Batteries by Localized High-Concentration Electrolytes with 2-Fluoropyridine Additive

Raising the cycling stability of aqueous lithium-ion batteries by eliminating oxygen in the electrolyte

Enhanced Cycling Performance of Li–O 2 Battery by Highly Concentration Electrolyte of LiFSA/Methyl Pivalate

Ultra-stable Li||LiFePO4 Batteries Via Advanced Designing of Localized High Concentration Electrolyte

Taming the chemical instability of lithium hexafluorophosphate-based electrolyte with lithium fluorosulfonimide salts

Improving Cycling Stability of Ni‐Rich Cathode for Lithium‐Metal Batteries via Interphases Tunning

High-Efficiency Electrolyte for Li-Rich Cathode Materials Achieving Enhanced Cycle Stability and Suppressed Voltage Fading Capable of Practical Applications on a Li-Ion Battery

Cathode Interfacial Engineering to Enhance Cycling Stability of Rechargeable Lithium-Ion Batteries

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

Stable Cycling of High-Voltage Lithium-Metal Batteries Enabled by High-Concentration FEC-Based Electrolyte

Large-scale Synthesis of Lithium- and Manganese-Rich Materials with Uniform Thin-Film Al 2 O 3 Coating for Stable Cathode Cycling

Rational design of electrolyte solvation structure for stable cycling and fast charging lithium metal batteries

Ameliorating Phosphonic-Based Nonflammable Electrolytes Towards Safe and Stable Lithium Metal Batteries

Stabilizing Layered Structure in Aqueous Electrolyte via Dynamic Water Intercalation/Deintercalation

Stable Cycling of Lithium-Metal Batteries in Hydrofluoroether-Based Localized High-Concentration Electrolytes with 2-Fluoropyridine Additive

Regulation of Molecular Microheterogeneity in Electrolytes Enables Ampere-Hour-Level Aqueous LiMn2O4||Li4Ti5O12 Pouch Cells

An effective approach to protect lithium anode and improve cycle performance for Li-S batteries.

Adjusting Interfacial Reactions for Achieving Highly Stable Operation in Lithium Metal Batteries

Designing High Donor Number Anion Additive for Stable Lithium Metal Batteries