Abstract:The stability and reliability of electricity grids requires a continuous balance between energy supply and demand. Renewable generation, such as solar and wind, is intermittent, which causes sudden and unanticipated changes to power output and contributes to electricity grid instability. The aqueous lithium-ion battery (LIB) or sodium-ion battery (SIB) may solve both the safety problem associated with lithium-ion batteries that use highly toxic and flammable organic solvents, and the poor cycling life associated with commercialized aqueous rechargeable batteries including lead-acid and nickel-metal hydride systems. Aqueous LIB and SIB have been demonstrated to be one of the most promising stationary power sources for the sustainable energy such as wind and solar power. As early as in 2005, we developed a new concept hybrid electrochemical supercapacitor in which a Li-ion intercalated compound was used as a positive electrode in combination with an activated carbon negative electrode in a Li2SO4 aqueous electrolyte (ZL. 200510025269.6). The negative electrode stores charge through a reversible nonfaradaic reaction of Li-ion on the surface of an activated carbon. The positive electrode utilizes a reversible faradic reaction of Li-ion insertion/extraction in the lithium-ion intercalated compounds. A hybrid cell consisting of a spinel LiMn2O4 positive and an AC negative electrode shows excellent reversibility with a sloping voltage profile from 0.8 to 1.8 V at an average voltage near 1.3 V, and delivers an 8 Wh/kg of 60000 F practical cell. In order to improve the specific energy, we employed LiTi2(PO4)3, but the cell shows poorer cycling stability compared with the pure AC anode. We analyzed the stability of electrode materials in aqueous electrolytes extensively. We found that, in the presence of oxygen, the discharged state of lithium-ion intercalated compounds (LIC) of all negative electrode materials suitable for aqueous lithium-ion batteries reacts with water and O2, with no dependence on the pH value of the electrolyte, which is mainly responsible for the capacity fading of aqueous lithium-ion batteries during charge/discharge cycling. By eliminating the O2 (using a sealed cell), adjusting the pH values of the electrolyte, and using carbon-coated electrode materials; the LIB shows much cycling stability. A commercialized hybrid LIB shows a specific energy of ca. 30 Wh/kg, and exhibits a good cycling stability over 3500 cycles. References: Xia et al., TiP2O7 and Expanded Graphite Nanocomposite as Anode Material for Aqueous Lithium-Ion Batteries. ACS Appl. Mater. Interfaces, 9, 8075-8082 (2017). Xia et al., Environmentally-friendly aqueous Li (or Na)-ion battery with fast electrode kinetics and super-long life, Adv. , 2: e1501038 (2016). Xia et al., Raising the Cycling Stability of Aqueous Lithium-Ion Batteries by Eliminating O2 in the Electrolyte ”, Nat . Chem . , 2, 760-765 (2010). Xia et al., Hybrid aqueous energy storage cells using activated carbon and lithium-intercalated compounds I. The C/LiMn2O4 system, Electrochem. Soc. , 153(2): A450-A454 (2006).

Raising the cycling stability of aqueous lithium-ion batteries by eliminating oxygen in the electrolyte

Enhancing Cycle Stability of Lithium Iron Phosphate in Aqueous Electrolytes by Increasing Electrolyte Molarity

Enabling safe aqueous lithium ion open batteries by suppressing oxygen reduction reaction

Enhanced Cycling Performance of Li–O 2 Battery by Highly Concentration Electrolyte of LiFSA/Methyl Pivalate

Stable Long Cycling of Small Molecular Organic Acid Electrode Materials Enabled by Nonflammable Eutectic Electrolyte

Hybrid aqueous/ionic liquid electrolyte for high cycle stability and low temperature adaptability lithium-ion battery

Enhancing the Cycling Stability for Lithium-Metal Batteries by Localized High-Concentration Electrolytes with 2-Fluoropyridine Additive

(Battery Division Technology Award) Aqueous Li(Na) –ion Batteries As Potential Stationary Power

Stable cycling of high-voltage lithium metal batteries in ether electrolytes

Lithium Titanate Hydrates with Superfast and Stable Cycling in Lithium Ion Batteries

Tuning a Solvation Structure of Lithium Ions Coordinated with Nitrate Anions through Ionic Liquid‐Based Solvent for Highly Stable Lithium Metal Batteries

Oxidative Stabilization of Dilute Ether Electrolytes via Anion Modification

Cathode Interfacial Engineering to Enhance Cycling Stability of Rechargeable Lithium-Ion Batteries

Stabilizing Layered Structure in Aqueous Electrolyte via Dynamic Water Intercalation/Deintercalation

Ameliorating Phosphonic-Based Nonflammable Electrolytes Towards Safe and Stable Lithium Metal Batteries

Opening and Constructing Stable Lithium-ion Channels within Polymer Electrolytes

Highly Stable Lithium Metal Batteries Enabled by Regulating the Li+ Solvation in Nonaqueous Electrolyte.

An “Ether‐In‐Water” Electrolyte Boosts Stable Interfacial Chemistry for Aqueous Lithium‐Ion Batteries

Double-Phase Electrolyte Enabling the Long-Lasting Redox Mediation in Li–O2 Batteries

A Green Asymmetric Bicyclic Co-Solvent Molecule for High-Voltage Aqueous Lithium-Ion Batteries

Reduction‐Tolerance Electrolyte Design for High‐Energy Lithium Batteries