Experimental study on the influence of intermediate principal stress on failure characteristics of strain rock burst for granite
Chunxiao Li,Dejian Li,Xiaolin Liu,Li, Dejian,Liu, Xiaolin
DOI: https://doi.org/10.1007/s10064-023-03370-6
IF: 4.2
2023-08-04
Bulletin of Engineering Geology and the Environment
Abstract:During the excavation process of deep underground engineering, investigating the effect of the redistribution of radial surrounding rock stress field within roadway under various buried depths on rock burst characteristics is of great meaning. Hence, in this study, a series of true triaxial rock burst experiments under five intermediate principal stresses σ 2 with 9.4, 18.8, 28.2, 37.6, and 47 MPa ( σ 2 = 10%, 20%, 30%, 40%, and 50% of uniaxial compressive strength σ uc ) were conducted on granite. The experimental results indicate that with an increase in σ 2 , the evolution of damage severity within specimen exhibits a delaying and then accelerating trend; correspondingly, the peak strength σ p of specimen also increases firstly and then decreases. With the development of σ 2 , the rock burst failure modes transform from tensile-shear failure to predominantly shear failure, and the released energy and the volume of rock burst pit arrive at maximum value when σ 2 is 30% σ uc . To verify the reliability of assumed critical stress status with σ 2 = 30% σ uc , the fractal dimensions of rock burst fragments were calculated from three kinds of views, i.e., the distribution of granularity, the surface morphology, and micro-cracks of fragments, respectively. When σ 2 = 30% σ uc , the obtained fractal dimensions from three kinds of views are minimum value. Combining above both aspects, σ 2 = 30% σ uc is determined as a critical stress status, and it symbols rock mass has greatest resistance for rock burst failure, the possibility of rock burst failure is least, and the intensity of rock failure is the most severe.
engineering, environmental,geosciences, multidisciplinary, geological