Abstract:Purpose – Rock-fill dams are embankments of compacted free-draining granular earth containing an impervious zone. Earth utilized in such dams often contains a high percentage of large particles – hence the term rock-fill. Mass stability of these dams results from friction and particle interactions rather than through a cementing agent binding the particles together. However, high-stress conditions and prolonged exposure to the elements can severely damage rock-fill. Therefore, understanding and modeling rock-fill breakage is important for dam engineering. The purpose of this paper is to improve discontinuous deformation analysis (DDA) techniques for modeling rock-fill breakage, proving the new method using simulations of spherical particle crushing. Design/methodology/approach – This work models rock-fill as bonded ellipsoid particles, and develops an improved DDA method to model the breakage of particle assemblies. The paper starts by describing the principles of three-dimensional DDA for spherical particles, and then derives the submatrices for normal contact, shear contact, and frictional force. The new algorithm incorporates a bond model with a revised open-close iteration algorithm into the DDA method to simulate particle crushing. To validate the improved DDA method, calculated particle contacts and movements are validated against theoretical results. Finally, this work performs a series of point-loading experimental tests for cement ellipsoid particles of both high and low compression strengths, with the test results compared against the results from corresponding DDA simulations. Findings – In particle crushing tests, the force and displacement show an approximately linear relationship until the crushing point, at which point low compression ellipsoid particles split into several large pieces while the high-compression particles break into many small fragments. The DDA simulation results are in good agreement with the crushing tests, demonstrating the validity of the DDA method for solving particle crushing problems. Although the improved DDA model is applicable to rock-fill particle crushing studies, some issues remain, particularly in increasing calculation efficiency and performing large-scale computations and long real-time simulations. Future research should address these issues. Originality/value – A bond model with a revised open-close iteration algorithm is incorporated into the DDA method. The simulated results shed insight into rock-fill crushing mechanisms, an element of concern in engineering practices.

Role of Particle Breakage in Rockfill Materials: Investigated by Using Combined SBFEM/DEM with Two Different Breakage Models

Dem Study on the Effect of Particle Breakage on the Macro- and Micro-Behavior of Rockfill Sheared along Different Stress Paths

DEM Simulation of Shearing Rockfills along Different Stress Paths

DEM Simulation of the Behavior of Rockfill Sheared with Different Intermediate Principle Stress Ratios

A coupled FEM-DEM study on mechanical behaviors of granular soils considering particle breakage

Three-dimensional discrete element simulation of random breaking strength and size effect in single particle splitting test of rockfll

Particle Crushing Simulations with Improved Discontinuous Deformation Analysis

Determining Digital Representation and Representative Elementary Volume Size of Broken Rock Mass Using the Discrete Fracture Network–Discrete Element Method Coupling Technique

3D modelling of soil-rock mixtures considering the morphology and fracture characteristics of breakable blocks

A static and dynamic constitutive model of rockfill material considering particle breakage

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Cohesive zone method based multi particle finite element simulation of compaction densification process of Al and NaCl laminar composite powders

A New Modified Replacement Method for Discrete Element Modelling of Rockfill Material

Triaxial numerical simulation study on the mechanical properties of rockfill materials under different boundary conditions

Particle breakage and gradation evolution of rockfill materials during triaxial shearing based on the breakage energy

Characteristics of particle breakage and constitutive model of coarse granular material incorporating gradation evolution

Discrete Element Modeling of Strength and Failure Behavior of Transversely Isotropic Rock under Uniaxial Compression

DEM SIMULATION OF WETTING DEFORMATION CHARACTERISTICS OF ROCKFILL CONSIDERING PARTICLE BREAKAGE

Discrete Element Modeling of the Effect of Particle Shape on Creep Behavior of Rockfills

A Density-Dependent Constitutive Model of Rockfill as Well as a Dynamic Contact Technique for Simulation of Dynamic Compaction with MPM

Particle Flow Simulations of the Compaction of Filling Materials in Highly Filled Foundation with Analyses of the Transverse Isotropy