Abstract:Duplex stainless steels (DSSs) possess desirable combinations of mechanical properties and excellent corrosion resistance due to their composition and equilibrium microstructure of roughly equivalent fractions of ferrite and austenite. They are used in harsh environments such as marine infrastructures, oil & gas, and paper & pulp industries. Components with complex geometries are often required for these applications. Additive manufacturing (AM) techniques such as laser powder bed fusion (LPBF) can be harnessed to fabricate components with greatest complexity. However, AM fabrication is well-known to promote non-equilibrium microstructures with high dislocation densities and Cr 2 N precipitates, resulting in inferior ductility. This is generally regarded as a challenge, however, short heat treatments of such as-built microstructures have been shown to attain refined duplex equilibrium microstructures. Recently, annealed LPBF DSS 2205 has been reported to possess strength higher than wrought counterparts and ductility properties better than the as-built state. However, the microstructural phenomena and deformation mechanisms behind these attractive properties remain poorly understood. Through multi-scale microstructural characterization, we show that the improved strength results not only from the hard ferrite phase, but also fine austenite grain size and nanoscale oxide dispersion strengthening. The enhanced ductility may be attributed to a combination of deformation mechanisms including dislocation slip, stacking fault formation, deformation twinning, and a deformation-induced martensitic transformation. We discuss how the level of microstructural complexity and solid-state phase transformations during LPBF and annealing can unlock multiple strengthening mechanisms during tensile deformation. Such fundamental understanding is crucial for designing AM parts with reproducible and optimised mechanical properties.

Electron work functions of ferrite and austenite phases in a duplex stainless steel and their adhesive forces with AFM silicon probe

Investigation of fatigue mechanical properties of apolycrystalline solid at mesoscopic scale using depth-sensing indentation (DSI) technique

Determination of fatigue mesoscopic mechanical properties of an austenitic stainless steel using depth-sensing indentation (DSI) technique

Mesoscopic mechanical properties of 18Cr-8Ni austenitic steel subjected to low-cycle fatigue loading

Nanoindentation Experiment and Finite Element Characterization of the Cyclic Deformation Behavior of Duplex Stainless Steel

Electron work function: an indicative parameter towards a novel material design methodology

Micromechanical Observation and Numerical Simulation for Local Deformation Evolution of Duplex Stainless Steel

A TEM Study of the Crystallography of Austenite Precipitates in a Duplex Stainless Steel

Tensile behavior of ferritic/austenitic iron with a bimodal structure:An atomistic study

Characterization of Native Oxide and Passive Film on Austenite/Ferrite Phases of Duplex Stainless Steel Using Synchrotron HAXPEEM

Ferrite-austenite synergistic deformation behavior in a 2205 duplex stainless steel containing equiaxed austenite domains

Nanoindentation Study on the Local Evaluation of Hydrogen-Induced Hardening Performance of Ferrite and Austenite in 2205 Duplex Stainless Steel: Experiment and Finite Element Modeling

Mechanical characterization of microconstituents in a cast duplex stainless steel by micropillar compression

Analysis of Phase-Specific Strain Pole Figures for Duplex Steels under Elasto-Plastic Uniaxial Tension—Experiment vs. EPSC Modelling

Nano-twining and Deformation-Induced Martensitic Transformation in a Duplex Stainless Steel 2205 Fabricated by Laser Powder Bed Fusion

Temperature-dependent mechanical properties of an austenitic-ferritic stainless steel studied by in situ tensile loading in a scanning electron microscope (SEM)

New insights into the character of austenite-ferrite boundaries in an additively manufactured duplex stainless steel

Link between b.c.c.–f.c.c. orientation relationship and austenite morphology in CF8M stainless steel

Strain partitioning in ferrite and mechanical properties of a cast multiphase stainless steel

Atomistic investigation of the mechanical and tribological responses of the ferrite-cementite interface with a Bagaryatskii orientation

Quantitative analysis of strength and plasticity of a 304 stainless steel based on the stress-strain curve