Abstract:A facile PDMS-glass hybrid microfluidic device is developed for generating uniform submicrometer-scale double emulsion droplets with unprecedented simplicity and controllability. Compared with planar flow-focusing geometries, our three-dimensional flow-focusing geometry is advantageous for stably producing femto- to atto-liter droplets without the retraction problem of the dispersed phase fluid. In addition, this microfluidic platform can withstand the use of strong organic solvents (e.g. tetrahydrofuran (THF) and toluene) as a dispersed phase without deforming PDMS devices because the dispersed phase containing organic solvents does not directly contact the PDMS wall. In particular, monodisperse double emulsions are generated spontaneously via the internal phase separation of single emulsions driven by the diffusion of a co-solvent (tetrahydrofuran) in microfluidic devices. Finally, we demonstrated that the double emulsions can be used as morphological templates of ultrafine spherical silica capsules with controlled hierarchical pore networks via the evaporation-induced self-assembly (EISA) method. During EISA, triblock copolymers (Pluronic F127) act as a surfactant barrier separating the internal droplet from the continuous oil phase, resulting in the 'inverse' morphology (i.e. hydrophobic polymer-in-water-in-oil emulsions). Depending on the precursor composition and kinetic condition, various structural and morphological features, such as mesoporous hollow silica spheres with a single central core, multi-cores, or a combination of these with robust controllability can be seen. Electron microscopy (SEM, STEM, HR-TEM), small angle X-ray scattering (SAXS), and N(2) adsorption-desorption confirm the well-controlled hierarchical pore structure of the resulting particles.

Spontaneous generation of emulsion droplets by autonomous fluid-pumping using the gas permeability of poly(dimethylsiloxane) (PDMS)

Controlled Production of Emulsion Drops Using an Electric Field in a Flow-Focusing Microfluidic Device

Hydrophilic surface modification of PDMS for droplet microfluidics using a simple, quick, and robust method via PVA deposition

Facile Microfluidic Device for Droplets Emulsion from Small Samples

Simple and Inexpensive Microfluidic Devices for the Generation of Monodisperse Multiple Emulsions

A versatile and robust microfluidic device for capillary-sized simple or multiple emulsions production

Manipulating The Generation Of Uniform O/W And W/O Emulsions Using Microfluidic T-Junction

Microfluidic synthesis of atto-liter scale double emulsions toward ultrafine hollow silica spheres with hierarchical pore networks

Glass Microdroplet Generator for Lipid-Based Double Emulsion Production

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

Efficient Separation of Methanol Single-Micron Droplets by Tailing Phenomenon Using a PDMS Microfluidic Device

A simple and low-cost fully 3D-printed non-planar emulsion generator

Controllable Microfluidic Production Of Gas-In-Oil-In-Water Emulsions For Hollow Microspheres With Thin Polymer Shells

Simple Method to Generate Droplets Spontaneously by a Superhydrophobic Double-Layer Split Nozzle.

Forced generation of simple and double emulsions in all-aqueous system

Simple and Cheap Microfluidic Devices for the Preparation of Monodisperse Emulsions.

Manipulating T-Junction Chip for the Generation of Uniform O/W and W/O Emulsions

Versatile On-Demand Droplet Generation For Controlled Encapsulation

A Microfluidic Strategy for Controllable Generation of Water-in-Water Droplets As Biocompatible Microcarriers.

Lipid-Stabilized Double Emulsions Generated in Planar Microfluidic Devices

A dual-core double emulsion platform for osmolarity-controlled microreactor triggered by coalescence of encapsulated droplets.