Abstract:In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.

Geometric Modeling and Characterization of Wall Thickness for Complex Cylindrical Thin-Walled Parts With Uncertain Manufacturing Deviations

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

A New Mathematical Method of Modeling Parts in Virtual CNC Lathing and Its Application on Accurate Tool Path Generation

Realistic Geometry Based Feature Modeling of Complex Part and Its Application in Assembly Quality Analysis

A unified geometric modeling method of process surface for precision machining of thin-walled parts

Systematic Solving of Machining Deformation and Process Optimization for Complex Thin-walled Parts

An Accurate and Efficient Approach to Geometric Modeling of Undeformed Chips in Five-Axis CNC Milling

An Efficient Algorithm for Calculations of Surface Errors in Peripheral Milling

Wall thickness error prediction and compensation in end milling of thin-plate parts

Shape-adaptive CNC Milling for Complex Contours on Deformed Thin-Walled Revolution Surface Parts

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

An accuracy algorithm for chip thickness modeling in 5-axis ball-end finish milling

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation

Deformation Analysing for Thin-Walled Parts Based on Analysis of Single-Tooth or Multi-Tooth Milling

Integrated Profile and Thickness Error Compensation for Curved Part Based on On-Machine Measurement

Configuration Design and Accuracy Analysis of Special Grinding Machine for Thin-Walled Small Concave Surfaces

Characterization of Dimensional Variations in Turning Process for Multistep Rotary Shaft of High-Speed Motorized Spindle

Error Compensation for Machining of Large Thin-Walled Part with Sculptured Surface Based on On-Machine Measurement

Analysis for deformation and dynamic characteristics about thin-wall part of aircraft