Abstract:The strain gauge method and the digital image correlation (DIC) method are commonly employed for measuring strain in tested objects, including material specimens and structural elements. The optical method enables the assessment of 3D strain fields across the entire area of interest, achieved through cameras and advanced software. The study investigates both quasi-static strength tests and more advanced research of structures. It explores full-scale construction testing, featuring highly stressed components of new wagon designs. The paper reviews the benefits and challenges of using the DIC method to measure large-scale elements. Conducting full-scale object testing is characterized by significant complexity, often involving interactions between elements, complex loading conditions, and the influence of friction. Numerous factors affect the measurements. Therefore, to compare both methods, an initially standard shear by tensile test of CFRP composite was analyzed. The analysis of strain maps provides valuable visualization of deformation patterns occurring during construction loading. The strain gauge method was crucial for verifying the quality of the DIC measurements. The results obtained provide a detailed understanding of how the components behave, highlighting the versatility of digital image correlation technology. For strain values of 0.3% and above, a good match was obtained between optical and strain gauge measurements. Below this value, the results have less accuracy. The results obtained provide a detailed understanding of how the components behave, highlighting the versatility of digital image correlation technology. The error comparison and discussion between different measurement scenarios were conducted. The paper presents a developed methodology for measuring strain and displacement state in complex and crucial structural elements. The method can be applied to measurements of heavily loaded components used in the transportation industry; for example, in railways.

Full-Field Dynamic Strain on Wind Turbine Blade Using Digital Image Correlation Techniques and Limited Sets of Measured Data From Photogrammetric Targets

Damage detection and full surface characterization of a wind turbine blade using three-dimensional digital image correlation

Application of 3D Digital Image Correlation Technique to Measurement of Wind Blade Properties from Coupon Test and Small-Sized-Blade Frequency Test

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Dynamic Strain Distribution Monitoring and Fatigue Damage Analysis on a 100 kW Wind Turbine Blade Based on Field Aerodynamic Measurements

Development of Digital-Image-Correlation Technique for Detecting Internal Defects in Simulated Specimens of Wind Turbine Blades

Application of Digital Image Correlation for Strain Mapping of Structural Elements and Materials

Structural Health Monitoring of Wind Turbine Blade Using Fiber Bragg Grating Sensors and Fiber Optic Rotary Joint

Real-Time Monitoring of Wind Turbine Blade Alignment Using Laser Displacement and Strain Measurement

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Nondestructive evaluation of carbon-fiber composites using digital image correlation, acoustic emission, and optical based modal analysis

A Vision-Based Displacement Measurement Method of Wind Turbine Blades in Biaxial Fatigue Testing

Development of a FBG based distributed strain sensor system for wind turbine structural health monitoring

Preliminary Test for 3D Surface Strain Measurement in the Tower and Foundation of Offshore Wind Turbines Using DOFS

Assessment of Digital Image Correlation Effectiveness and Quality in Determination of Surface Strains of Hybrid Steel/Composite Structures

Damage Detection for Rotating Blades Using Digital Image Correlation with an AC-SURF Matching Algorithm

Studying and analysis of deformation and stresses in horizontal-axis wind turbine using fluid-structure interaction method

Condition Monitoring of Wind Turbine Blades Using Active and Passive Thermography

Dynamic digital image correlation method for rolling convective contact

Structural Testing by Torsion of Scalable Wind Turbine Blades

Research on rapid calculation method of wind turbine blade strain for digital twin