Abstract:With the utilization of photomasks, micro/nanoscale wells and channels with depths ranging from nanometers to several micrometers were fabricated on a poly(ethylene terephthalate) (PET) surface by a simple combination of photochemical and alkaline hydrolysis etching. The PET surface region could be directly and photochemically etched by UV light and N,N-dimethylformamide (DMF) to create 125-350 nm etching depths (step 1). In step 2, the depth could be further enlarged to 250-1400 nm by potassium hydroxide (KOH) developing. More importantly, when this combination etching was repeated with the same photomask, the depth increased with increasing etching times. For instance, the depth reached approximately 6 mu m after a series of three combination etchings. The cross-sectional shape of the final structure was trapezoidal with smooth corners. No obvious widening effect in lateral size was observed after one combination etching, whereas the top width of the microfabricated channels was enlarged from 50 mu m (the designed feature of the photomask used) to 100 mu m after two or three combination etchings. Even more interesting was that step 1 resulted in the formation of a kind of aminated surface in the channel (6.5% amine content), but when step 2 was conducted, the aminated surface was erased. This process could be reversibly carried out by repeating step 1 (amination) and step 2 (erasing). Electrostatical self-assembly of an antibody, fluorescein isothiocyanate-labeled immunoglobulin G (FITC-IgG, goat anti-rabbit), was achieved on the aminated surface of the etched channels, which demonstrated that by this combination strategy, micro/nanoscale channels or wells featuring tunable depths and functional channel surfaces could be readily fabricated. Undoubtedly, these functionalized channels or wells onto organic substrates could provide a potential platform for microchips toward various functions such as microarrays, heterogeneous immunoassays, biosensors, concentrations, filtrations, and microanalysis.

In Situ Agarose Microfabrication Technology Using Joule Heating of Micro Ionic Current for On-Chip Cell Network Analysis

Ion Write Microthermotics: Programing Thermal Metamaterials at the Microscale

Non-electrolytic microelectroporation

An Agar Gel Membrane-Pdms Hybrid Microfluidic Device for Long Term Single Cell Dynamic Study

Fabrication of Agar-Gel Microelectrodes and Their Application in the Study of Ion Transfer Across the Agar–water ∣ 1,2-Dichloroethane Interface

Thermomodulated Cell Culture/harvest in Polydimethylsiloxane Microchannels with Poly(n-Isopropylacrylamide)-grafted Surface

Thermal Analysis of Injectable, Cellular-Scale Optoelectronics with Pulsed Power

Analysis of In Situ Electroporation Utilizing Induced Electric Field at a Wireless Janus Microelectrode

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Laser microfabrication of a microheater chip for cell culture outside a cell incubator

Application of Microfluidic Chips to Bacterial Metapopulations Culture by Integrating Agarose Structure

Fabrication of PMMA microfluidic chips using disposable agar hydrogel templates.

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

Large-Area Nanogap-Controlled 3D Nanoarchitectures Fabricated via Layer-by-Layer Nanoimprint

Micro/nanoscale well and channel fabrication on organic polymer substrates via a combination of photochemical and alkaline hydrolysis etchings.

Fabrication of A Fiberglass-Packed Channel in A Microchip for Flow Injection Analysis

Hot Embossing of Electrophoresis Microchannels in PMMA Substrates Using Electric Heating Wires.

Continuous On‐Chip Synthesis of Ag Nanoparticles Assisted by Resonant Microwave Heating Using a Post‐Wall Waveguide

On-Chip Concentration and Patterning of Biological Cells Using Interplay of Electrical and Thermal Fields

On-chip pressure generation using a gel membrane fabricated outside of the microfluidic network

Efficient cell capture in an agarose–PDMS hybrid chip for shaped 2D culture under temozolomide stimulation