Abstract:The precise rotation of suspended cells is one of the many fundamental manipulations used in a wide range of biotechnological applications such as cell injection and enucleation in nuclear transfer (NT) cloning. Noticeably scarce among the existing rotation techniques is the three-dimensional (3D) rotation of cells on a single chip. Here we present an alternating current (ac) induced electric field-based biochip platform, which has an open-top sub-mm square chamber enclosed by four sidewall electrodes and two bottom electrodes, to achieve rotation about the two axes, thus 3D cell rotation. By applying an ac potential to the four sidewall electrodes, an in-plane (yaw) rotating electric field is generated and in-plane rotation is achieved. Similarly, by applying an ac potential to two opposite sidewall electrodes and the two bottom electrodes, an out-of-plane (pitch) rotating electric field is generated and rolling rotation is achieved. As a prompt proof-of-concept, bottom electrodes were constructed with transparent indium tin oxide (ITO) using the standard lift-off process and the sidewall electrodes were constructed using a low-cost micro-milling process and then assembled to form the chip. Through experiments, we demonstrate rotation of bovine oocytes of similar to 120 mu m diameter about two axes, with the capability of controlling the rotation direction and the rate for each axis through control of the ac potential amplitude, frequency, and phase shift, and cell medium conductivity. The maximum observed rotation rate reached nearly 140 degrees s(-1), while a consistent rotation rate reached up to 40 degrees s(-1). Rotation rate spectra for zona pellucida-intact and zona pellucida-free oocytes were further compared and found to have no effective difference. This simple, transparent, cheap-to-manufacture, and open-top platform allows additional functional modules to be integrated to become a more powerful cell manipulation system.

On-Chip Concentration and Patterning of Biological Cells Using Interplay of Electrical and Thermal Fields

Joule Heating-Induced Particle Manipulation on a Microfluidic Chip

Biologically Active Micropatterns of Biomolecules and Living Matter Using Microbubble Lithography

On-chip multiplexed single-cell patterning and controllable intracellular delivery

Directional free-surface flows on a microfluidic chip with interplay of electrical and thermal fields

On‐chip technology for single‐cell arraying, electrorotation‐based analysis and selective release

Flexible Trapping and Manipulation of Single Cells on a Chip by Modulating Phases and Amplitudes of Electrical Signals Applied Onto Microelectrodes.

Simple, Cost-Effective, and Continuous 3D Dielectrophoretic Microchip for Concentration and Separation of Bioparticles

Cells on chips

AC electric field induced dipole-based on-chip 3D cell rotation.

Programing Cell Assembly via Ink-Free, Label-Free Magneto-Archimedes Based Strategy

An integrated micro-chip for cell array positioning, in-situ impedance measurement and electroperation

Cell Trapping Utilizing Insulator-based Dielectrophoresis in The Open-Top Microchannels

On-chip dielectrophoretic single-cell manipulation

The construction of an individually addressable cell array for selective patterning and electroporation.

Convection-Enhanced Biopatterning with Recirculation of Hydrodynamically Confined Nanoliter Volumes of Reagents

A Microfluidic Chip for Cell Patterning Utilizing Paired Microwells and Protein Patterns

Integrated Cell Manipulation Systems

On-chip alternating current electrophoresis in supported lipid bilayer membranes.

Study of a Microfluidic Chip Integrating Single Cell Trap and 3D Stable Rotation Manipulation.

Controllable and Scaffold‐Free Formation of 3D Multicellular Architectures Using a Bipolar Electrode Array