Abstract:Compared with traditional technologies,3D printing technology has shown great advantages in direct formation of metal and polymer parts with complex shapes.However,there are many problems in the preparation of ceramic parts via 3D printing.In this respect,lots of researches have been done by Prof.Shi Y S`s group in Huazhong University of Science and Technology on the preparation of different ceramic materials used for 3D printing technology and related forming methods.In this review,two main methods to prepare composite powders used in Selective Laser Sintering (SLS) were introduced in detail: ①mechanical mixing method,by which ceramic powders and polymer were directly mixed;②dissolution-precipitation process or solvent evaporation method,by which the ceramic powders were coated with polymer.The results showed that both two preparation methods mentioned above were suitable to prepare ceramic-polymer composite powders with good fluidity for 3D printing technology.Furthermore,the forming mechanisms of SLS and the effects of SLS process parameters,including preheating temperature,laser power,layer thickness and so on,on mechanical properties and manufacturing accuracy of ceramic green parts were systematically discussed.On the basis of above results,porous cordierite and kaolin ceramics with 3D pore structures,which were difficult to be fabricated by the conventional forming technologies,were manufactured by SLS technology with optimized process parameters.In addition,to improve the density and mechanical properties of SLSed ceramic parts,a hybrid technology named SLS/Cold Isostatic Pressing (CIP) was proposed by introducing the CIP technology into the field of SLS.Dense Al2O3,ZrO2 and SiC ceramic parts with high performance and complex structure were prepared through this hybrid technology.The results indicated that SLS and SLS/CIP technologies could be the promising routes to prepare high-performance ceramic components used in the fields of aerospace,national defense,etc.

New Materials for SLS: The Use of Antistatic and Flow Agents

A Method of Predicting Powder Flowability for Selective Laser Sintering

Large-Scale Equipment and Higher Performance Materials for Laser Additive Manufacturing

Experimental Investigation on Friction Behavior of Selective Laser Sintering Processed Parts

Phase-field-model-based Analysis of the Effects of Powder Particle on Porosities and Densities in Selective Laser Sintering Additive Manufacturing

The influence of material properties and process parameters on the spreading process in additive manufacturing

Polymer Materials for Additive Manufacturing: Liquid Materials

Investigating particle morphology, quality, flowability and performance of abrasive-grinding based powders for directed energy deposition

Study on Self-Heating Metallic Powder for the Selective Laser Sintering Process

A versatile SPH modeling framework for coupled microfluid-powder dynamics in additive manufacturing: binder jetting, material jetting, directed energy deposition and powder bed fusion

Metal powder as feedstock for laser-based additive manufacturing: From production to powder modification

Computational Framework to Model the Selective Laser Sintering Process

Preparation of Ceramic Materials Used for Selective Laser Sintering and Related Forming Methods

Impact of process flow conditions on particle morphology in metal powder production via gas atomization

Powder sheet additive manufacturing of multi-material structures: Experimental and computational characterizations

Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing

Metal powders of selective laser sintering

Selective Laser Sintering of Polymer Based Nanocomposites

Advances in selective laser sintering of polymers

Influence of the particle size distribution of monomodal 316L powder on its flowability and processability in powder bed fusion

Selective Laser Sintering of Acrylonitrile Butadiene Styrene Polymer and Post-Processing Enhancement: an Experimental Study