Abstract:<p>Additive manufacturing processes as for instance selective laser melting or electron beam melting are becoming more common and just turning into standard manufacturing processes for metal components. Nevertheless, these processes are still new compared to classic powder metallurgy manufacturing routes such as pressing and sintering. Hence not all necessary requirements for the powders in use are fully known yet. This makes an increase in control of the powder properties a crucial task to achieve. To reach this goal one must understand the different influences on the powder production process from the beginning of the whole production route. In this work, the influence of the spray chamber flow on the particle morphology is examined. The nozzle system used to produce the metal powders is a close-coupled atomization system with a convergent-divergent gas nozzle configuration. The particle morphology as well as the particle size distribution have been analyzed to examine the influence of the atomization gas flow compared to an additional use of a coaxial gas flow. To review the changes of the flow patterns, computational fluid dynamic simulations have been performed. The particle trajectories were calculated to assess the change in particle behavior as well. Atomization experiments have been conducted with an AISI 52100 (1.3505) steel in a small batch atomization plant to evaluate the influence of the change in flow on the particle size distribution and circularity. The experimental results show that a use of additional coaxial gas leads to an increase in particle circularity up to 10% for relevant particle sizes. An approach for the quantification of satellite occurrence is given by examination of the shift of the particle size distribution to smaller diameters.</p>

Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing

Vibratory Powder Feeding for Powder Bed AdditiveManufacturing using Water and Gas Atomized MetalPowders

Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing

Metal powder as feedstock for laser-based additive manufacturing: From production to powder modification

Multiphysics modelling of powder bed fusion for polymers

The interplay of local chemistry and plasticity in controlling microstructure formation during laser powder bed fusion of metals

Powder-size driven facile microstructure control in powder-fusion metal additive manufacturing processes

Additive Manufacturing of Polymer-Metal/Ceramic Functionally Graded Composite Components via Multiple Material Laser Powder Bed Fusion

Investigating particle morphology, quality, flowability and performance of abrasive-grinding based powders for directed energy deposition

Tailoring metal powders by dry nanoparticle coating for powder bed fusion applications

Physics-Based Modeling and Predictive Simulation of Powder Bed Fusion Additive Manufacturing Across Length Scales

Solid-state production of uniform metal powders for additive manufacturing by ultrasonic vibration machining

Processing of Highly Filled Polymer–Metal Feedstocks for Fused Filament Fabrication and the Production of Metallic Implants

Analysis of the Nanoparticle Dispersion and Its Effect on the Crystalline Microstructure in Carbon-Additivated PA12 Feedstock Material for Laser Powder Bed Fusion

The influence of material properties and process parameters on the spreading process in additive manufacturing

Impact of process flow conditions on particle morphology in metal powder production via gas atomization

Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Roller-based spreading approaches

Processing parameters in laser powder bed fusion metal additive manufacturing

Quantitative Characterization of Metal Powder Morphology, Size Distribution, and Flowability for Additive Manufacturing

Dynamics of pore formation during laser powder bed fusion additive manufacturing