Abstract:Bamboo–wood composites have found extensive applications in the container flooring, furniture, and construction industries. However, commonly utilized bamboo units such as four-side-planed rectangular bamboo strips and bamboo scrimber suffer from either low utilization rates or high adhesive content. The recently developed bamboo-flattening technology, which employs softening methods with saturated high-pressure steam, may improve the utilization rate and reduce the adhesive content, but its complex processes and high cost restrict its widespread application. This study introduces a novel bamboo–wood composite utilizing high-utilization, easy-to-manufacture bamboo units processed through a straightforward flattening-and-grooving method. However, the stress concentration introduced by the grooving treatment may affect the mechanical properties and stability of the bamboo–wood composites. In order to optimize the mechanical properties and bonding performance, response surface methodology based on a central composite rotatable design was used to map the effects of hot-pressing parameters (time, temperature, and pressure) on the mechanical properties. The bamboo-woodbamboo–wood composites prepared with optimized conditions of 1.18 min/mm pressing time, 1.47 MPa pressure, and a 150 °C temperature had a 121.51 MPa modulus of rupture and an 11.85 GPa modulus of elasticity, which exhibited an error of only ~5% between the experimental and model predictions. Finite element analysis revealed that, in comparison to homogeneous flat bamboo composites, grooved bamboo composites exhibited distinct tensile ductility and toughness due to discontinuous stress fields and alternating rigid–soft layers, which alter the stress transmission and energy dissipation mechanisms. Additionally, grooving treatment not only effectively improved the surface wettability of the bamboo plants, thus enhancing the permeability of the adhesive, but also facilitated adhesive penetration into parenchymal cells and fibers. This led to the formation of a more robust glue–nail structure and chemical bonding.

Study on the bond performance of bamboo-steel interface after cyclic loading

Study on bond stress and bond slip of bamboo-steel interface under static load

Experimental study on dynamic behavior of CFRP-to-steel interface

Experimental studies of the bearing capability of a type of steel-concrete composite slab

Mechanical Behavior of Glued Laminated Bamboo Moment-Resisting Connections

Experimental study on creep and loading property of laminated bamboo bridge

A Novel Bamboo–Wood Composite Utilizing High-Utilization, Easy-to-Manufacture Bamboo Units: Optimization of Mechanical Properties and Bonding Performance

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Theoretical solution for bond-slip behavior of composite structures consisting of H-shape beam and concrete based on experiment, numerical simulation, and theoretical derivation

Study on Behavior of Steel Hoop Connections for Raw Bamboo Members

Mechanical behavior of natural bonding interface in hollow steel-UHPC composite bridge deck

Load-Transfer Mechanism and Bond-Stress Components in Steel and Steel Fiber–Reinforced Concrete Structure

The Bond Behavior Between Concrete and Corroded Steel Bar under Repeated Loading

Experimental study and analysis of the bond-anchorage properties of laminated flattened-bamboo lumber connections with glued-in steel rod

Flexural property of steel reinforced bamboo scrimber composite beam

A Study on the Bond–Slip Relationship of the CFRP–Steel Interface of CFRP Strengthened Steel

Experimental performance of threaded steel glued into laminated bamboo

Bond Degradation Mechanism and Constitutive Relationship of Ribbed Steel Bars Embedded in Engineered Cementitious Composites under Cyclic Loading

Interfacial bonding stress transfer and failure mechanism between corrugated steel plate and reinforced concrete

Experiment Study on Bond Slip Behavior Between Section Steel and Concrete in SRC Structures

Study on Bond-Slip Behaviors of Self-Stressing Steel Slag Concrete-Filled Steel Tube