Study on bond stress and bond slip of bamboo-steel interface under static load

Li Yushu

Abstract:In order to investigate the distribution of bamboo-steel interfacial bonding stress and bond-slip,two kinds of interfaces were designed: the pure bonding interface which combines bamboo and steel with structural adhesive and the composite bonding interface which combines interfaces with adhesive and self-tapping screws. Six specimens were made to perform the push-out test,in which the bearing capacities and strain data of the bamboo plate were acquired.Based on mechanical analyses,a second order differential equation of the distribution of normal stress of bamboo plate was derived. Analytical solution for the equation was acquired through boundary conditions and data fitting,and formulas to calculate the interfacial shear stress and bond-slip were established afterwards. Furthermore,expressions about the bearing capacity for bamboo-steel interfaces under static load were developed on basis of shear stress formula.Experimental and analytical results show that the bamboo-steel interfaces own excellent performances; the damage of the composite interface specimen has significant ductility characteristics. Experimental values of the bamboo plate's normal stress agree well with the fitted values,which provides a solid reference to calculation of the interfacial shear stress and slip. The distribution of interfacial shear stress and slip has a characteristic that the maximum values occur at the boundary side while the minimum values are found in middle part of the interface. The interfacial shear stress and slip near the pressure point of the bamboo plate are obviously greater,when compared with those near the pressure point of the adhesive substrate,and the maximum value of the shear stress is approximately 1. 64 MPa. The calculated values of bearing capacity agree well with experimental values with the calculation deviation less than 8%.

Engineering,Materials Science